STEINCONNECTOR product search

Filter
18 products found.
SERIES 090.0A
coupling, octagonal, Article: N9470
Nominal width 5.0 mm, material: brass, surface: nickel plated, single shut off, connection type: male thread DIN228/1, connection size: 1/8, seal: NBR (Perbunan) This one-hand coupling with automatic 5-point locking is used where a mixing up of medias has to be ruled out. Achieved this is done through a coding with simultaneous color labelling. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back in the direction of the connection. The valve will return to its starting position and push the plug out of the coupling. Material Coupling: back part, coupler body brass nickel plated. Valve brass. Sleeve aluminium anodised. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: brass nickel plated with anotised aluminium ring. Nominal width 5.0 mm, brass, surface: nickel plated, single shut off, male thread DIN228/1, 1/8, seal: NBR (Perbunan)
Nominal Width: 5 mm 5 Connection:  1/8 1/8 Flow Rate: 600 l/min 600
SERIES 090.0S
coupling, hexagonal, Article: N9460
Nominal width 5.0 mm, material: brass, surface: nickel plated, single shut off, connection type: male thread DIN228/1, connection size: 1/8, seal: NBR (Perbunan) This one-hand coupling with automatic 5-point locking is used where a mixing up of medias has to be ruled out. Achieved this is done through a coding with simultaneous color labelling. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back in the direction of the connection. The valve will return to its starting position and push the plug out of the coupling. Material Coupling: back part, coupler body brass nickel plated. Valve brass. Sleeve aluminium anodised. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: brass nickel plated with anotised aluminium ring. Nominal width 5.0 mm, brass, surface: nickel plated, single shut off, male thread DIN228/1, 1/8, seal: NBR (Perbunan)
Nominal Width: 5 mm 5 Connection:  1/8 1/8 Flow Rate: 600 l/min 600
SERIES 090.0A
plug, octagonal, Article: NYG30
Nominal width 5.0 mm, material: brass, surface: nickel plated, single shut off, connection type: female thread DIN228/1 (BSP), connection size: 1/8, seal: NBR (Perbunan) This one-hand coupling with automatic 5-point locking is used where a mixing up of medias has to be ruled out. Achieved this is done through a coding with simultaneous color labelling. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back in the direction of the connection. The valve will return to its starting position and push the plug out of the coupling. Material Coupling: back part, coupler body brass nickel plated. Valve brass. Sleeve aluminium anodised. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: brass nickel plated with anotised aluminium ring. Nominal width 5.0 mm, brass, surface: nickel plated, single shut off, female thread DIN228/1 (BSP), 1/8, seal: NBR (Perbunan)
Nominal Width: 5 mm 5 Connection:  1/8 1/8 Flow Rate: 600 l/min 600
SERIES 090.0S
plug, hexagonal, Article: NYG20
Nominal width 5.0 mm, material: brass, surface: nickel plated, connection type: female thread DIN228/1 (BSP), connection size: 1/8, seal: NBR (Perbunan) This one-hand coupling with automatic 5-point locking is used where a mixing up of medias has to be ruled out. Achieved this is done through a coding with simultaneous color labelling. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back in the direction of the connection. The valve will return to its starting position and push the plug out of the coupling. Material Coupling: back part, coupler body brass nickel plated. Valve brass. Sleeve aluminium anodised. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: brass nickel plated with anotised aluminium ring. Nominal width 5.0 mm, brass, surface: nickel plated, female thread DIN228/1 (BSP), 1/8, seal: NBR (Perbunan)
Nominal Width: 5 mm 5 Connection:  1/8 1/8 Flow Rate: 600 l/min 600
SERIES 090.0R
coupling, round, Article: N1450
Nominal width 5.0 mm, material: brass, surface: nickel plated, single shut off, connection type: male thread DIN228/1, connection size: 1/8, seal: NBR (Perbunan) This one-hand coupling with automatic 5-point locking is used where a mixing up of medias has to be ruled out. Achieved this is done through a coding with simultaneous color labelling. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back in the direction of the connection. The valve will return to its starting position and push the plug out of the coupling. Material Coupling: back part, coupler body brass nickel plated. Valve brass. Sleeve aluminium anodised. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: brass nickel plated with anotised aluminium ring. Nominal width 5.0 mm, brass, surface: nickel plated, single shut off, male thread DIN228/1, 1/8, seal: NBR (Perbunan)
Nominal Width: 5 mm 5 Connection:  1/8 1/8 Flow Rate: 600 l/min 600
SERIES 090.0D
plug, triangular, Article: NYKC0
Nominal width 5.0 mm, material: brass, surface: nickel plated, single shut off, connection type: female thread DIN228/1 (BSP), connection size: 1/8, seal: NBR (Perbunan) This one-hand coupling with automatic 5-point locking is used where a mixing up of medias has to be ruled out. Achieved this is done through a coding with simultaneous color labelling. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back in the direction of the connection. The valve will return to its starting position and push the plug out of the coupling. Material Coupling: back part, coupler body brass nickel plated. Valve brass. Sleeve aluminium anodised. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: brass nickel plated with anotised aluminium ring. Nominal width 5.0 mm, brass, surface: nickel plated, single shut off, female thread DIN228/1 (BSP), 1/8, seal: NBR (Perbunan)
Nominal Width: 5 mm 5 Connection:  1/8 1/8 Flow Rate: 600 l/min 600
SERIES 090.0S
coupling, hexagonal, Article: N1420
Nominal width 5.0 mm, material: brass, surface: nickel plated, single shut off, connection type: male thread DIN228/1, connection size: 1/8, seal: NBR (Perbunan) This one-hand coupling with automatic 5-point locking is used where a mixing up of medias has to be ruled out. Achieved this is done through a coding with simultaneous color labelling. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back in the direction of the connection. The valve will return to its starting position and push the plug out of the coupling. Material Coupling: back part, coupler body brass nickel plated. Valve brass. Sleeve aluminium anodised. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: brass nickel plated with anotised aluminium ring. Nominal width 5.0 mm, brass, surface: nickel plated, single shut off, male thread DIN228/1, 1/8, seal: NBR (Perbunan)
Nominal Width: 5 mm 5 Connection:  1/8 1/8 Flow Rate: 600 l/min 600
SERIES 090.0A
coupling, octagonal, Article: N9210
Nominal width 5.0 mm, material: brass, surface: nickel plated, single shut off, connection type: male thread DIN228/1, connection size: 1/4, seal: NBR (Perbunan) This one-hand coupling with automatic 5-point locking is used where a mixing up of medias has to be ruled out. Achieved this is done through a coding with simultaneous color labelling. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back in the direction of the connection. The valve will return to its starting position and push the plug out of the coupling. Material Coupling: back part, coupler body brass nickel plated. Valve brass. Sleeve aluminium anodised. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: brass nickel plated with anotised aluminium ring. Nominal width 5.0 mm, brass, surface: nickel plated, single shut off, male thread DIN228/1, 1/4, seal: NBR (Perbunan)
Nominal Width: 5 mm 5 Connection:  1/4 1/4 Flow Rate: 600 l/min 600
SERIES 090.0A
coupling, octagonal, Article: N1430
Nominal width 5.0 mm, material: brass, surface: nickel plated, single shut off, connection type: male thread DIN228/1, connection size: 1/8, seal: NBR (Perbunan) This one-hand coupling with automatic 5-point locking is used where a mixing up of medias has to be ruled out. Achieved this is done through a coding with simultaneous color labelling. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back in the direction of the connection. The valve will return to its starting position and push the plug out of the coupling. Material Coupling: back part, coupler body brass nickel plated. Valve brass. Sleeve aluminium anodised. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: brass nickel plated with anotised aluminium ring. Nominal width 5.0 mm, brass, surface: nickel plated, single shut off, male thread DIN228/1, 1/8, seal: NBR (Perbunan)
Nominal Width: 5 mm 5 Connection:  1/8 1/8 Flow Rate: 600 l/min 600
SERIES 090.0D
coupling, triangular, Article: N9220
Nominal width 5.0 mm, material: brass, surface: nickel plated, single shut off, connection type: male thread DIN228/1, connection size: 1/4, seal: NBR (Perbunan) This one-hand coupling with automatic 5-point locking is used where a mixing up of medias has to be ruled out. Achieved this is done through a coding with simultaneous color labelling. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back in the direction of the connection. The valve will return to its starting position and push the plug out of the coupling. Material Coupling: back part, coupler body brass nickel plated. Valve brass. Sleeve aluminium anodised. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: brass nickel plated with anotised aluminium ring. Nominal width 5.0 mm, brass, surface: nickel plated, single shut off, male thread DIN228/1, 1/4, seal: NBR (Perbunan)
Nominal Width: 5 mm 5 Connection:  1/4 1/4 Flow Rate: 600 l/min 600
SERIES 090.0A
plug, octagonal, Article: NYKA0
Nominal width 5.0 mm, material: brass, surface: nickel plated, connection type: female thread DIN228/1 (BSP), connection size: 1/4, seal: NBR (Perbunan) This one-hand coupling with automatic 5-point locking is used where a mixing up of medias has to be ruled out. Achieved this is done through a coding with simultaneous color labelling. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back in the direction of the connection. The valve will return to its starting position and push the plug out of the coupling. Material Coupling: back part, coupler body brass nickel plated. Valve brass. Sleeve aluminium anodised. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: brass nickel plated with anotised aluminium ring. Nominal width 5.0 mm, brass, surface: nickel plated, female thread DIN228/1 (BSP), 1/4, seal: NBR (Perbunan)
Nominal Width: 5 mm 5 Connection:  1/4 1/4 Flow Rate: 600 l/min 600
SERIES 090.0D
coupling, triangular, Article: N1440
Nominal width 5.0 mm, material: brass, surface: nickel plated, single shut off, connection type: male thread DIN228/1, connection size: 1/8, seal: NBR (Perbunan) This one-hand coupling with automatic 5-point locking is used where a mixing up of medias has to be ruled out. Achieved this is done through a coding with simultaneous color labelling. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back in the direction of the connection. The valve will return to its starting position and push the plug out of the coupling. Material Coupling: back part, coupler body brass nickel plated. Valve brass. Sleeve aluminium anodised. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: brass nickel plated with anotised aluminium ring. Nominal width 5.0 mm, brass, surface: nickel plated, single shut off, male thread DIN228/1, 1/8, seal: NBR (Perbunan)
Nominal Width: 5 mm 5 Connection:  1/8 1/8 Flow Rate: 600 l/min 600
SERIES 090.0S
plug, hexagonal, Article: NYKE0
Nominal width 5.0 mm, material: brass, surface: nickel plated, connection type: female thread DIN228/1 (BSP), connection size: 1/4, seal: NBR (Perbunan) This one-hand coupling with automatic 5-point locking is used where a mixing up of medias has to be ruled out. Achieved this is done through a coding with simultaneous color labelling. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back in the direction of the connection. The valve will return to its starting position and push the plug out of the coupling. Material Coupling: back part, coupler body brass nickel plated. Valve brass. Sleeve aluminium anodised. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: brass nickel plated with anotised aluminium ring. Nominal width 5.0 mm, brass, surface: nickel plated, female thread DIN228/1 (BSP), 1/4, seal: NBR (Perbunan)
Nominal Width: 5 mm 5 Connection:  1/4 1/4 Flow Rate: 600 l/min 600
SERIES 090.0R
plug, round, Article: NYKD0
Nominal width 5.0 mm, material: brass, surface: nickel plated, single shut off, connection type: female thread DIN228/1 (BSP), connection size: 1/4, seal: NBR (Perbunan) This one-hand coupling with automatic 5-point locking is used where a mixing up of medias has to be ruled out. Achieved this is done through a coding with simultaneous color labelling. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back in the direction of the connection. The valve will return to its starting position and push the plug out of the coupling. Material Coupling: back part, coupler body brass nickel plated. Valve brass. Sleeve aluminium anodised. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: brass nickel plated with anotised aluminium ring. Nominal width 5.0 mm, brass, surface: nickel plated, single shut off, female thread DIN228/1 (BSP), 1/4, seal: NBR (Perbunan)
Nominal Width: 5 mm 5 Connection:  1/4 1/4 Flow Rate: 600 l/min 600
SERIES 090.0D
plug, triangular, Article: NYKB0
Nominal width 5.0 mm, material: brass, surface: nickel plated, single shut off, connection type: female thread DIN228/1 (BSP), connection size: 1/4, seal: NBR (Perbunan) This one-hand coupling with automatic 5-point locking is used where a mixing up of medias has to be ruled out. Achieved this is done through a coding with simultaneous color labelling. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back in the direction of the connection. The valve will return to its starting position and push the plug out of the coupling. Material Coupling: back part, coupler body brass nickel plated. Valve brass. Sleeve aluminium anodised. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: brass nickel plated with anotised aluminium ring. Nominal width 5.0 mm, brass, surface: nickel plated, single shut off, female thread DIN228/1 (BSP), 1/4, seal: NBR (Perbunan)
Nominal Width: 5 mm 5 Connection:  1/4 1/4 Flow Rate: 600 l/min 600
SERIES 090.0R
plug, round, Article: NYAX0
Nominal width 5.0 mm, material: brass, surface: nickel plated, single shut off, connection type: male thread DIN228/1, connection size: 1/8, seal: NBR (Perbunan) This one-hand coupling with automatic 5-point locking is used where a mixing up of medias has to be ruled out. Achieved this is done through a coding with simultaneous color labelling. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back in the direction of the connection. The valve will return to its starting position and push the plug out of the coupling. Material Coupling: back part, coupler body brass nickel plated. Valve brass. Sleeve aluminium anodised. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: brass nickel plated with anotised aluminium ring. Nominal width 5.0 mm, brass, surface: nickel plated, single shut off, male thread DIN228/1, 1/8, seal: NBR (Perbunan)
Nominal Width: 5 mm 5 Connection:  1/8 1/8 Flow Rate: 600 l/min 600
SERIES 090.0S
coupling, hexagonal, Article: N9200
Nominal width 5.0 mm, material: brass, surface: nickel plated, single shut off, connection type: male thread DIN228/1, connection size: 1/4, seal: NBR (Perbunan) This one-hand coupling with automatic 5-point locking is used where a mixing up of medias has to be ruled out. Achieved this is done through a coding with simultaneous color labelling. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back in the direction of the connection. The valve will return to its starting position and push the plug out of the coupling. Material Coupling: back part, coupler body brass nickel plated. Valve brass. Sleeve aluminium anodised. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: brass nickel plated with anotised aluminium ring. Nominal width 5.0 mm, brass, surface: nickel plated, single shut off, male thread DIN228/1, 1/4, seal: NBR (Perbunan)
Nominal Width: 5 mm 5 Connection:  1/4 1/4 Flow Rate: 600 l/min 600
SERIES 090.0R
coupling, round, Article: N9230
Nominal width 5.0 mm, material: brass, surface: nickel plated, single shut off, connection type: male thread DIN228/1, connection size: 1/4, seal: NBR (Perbunan) This one-hand coupling with automatic 5-point locking is used where a mixing up of medias has to be ruled out. Achieved this is done through a coding with simultaneous color labelling. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back in the direction of the connection. The valve will return to its starting position and push the plug out of the coupling. Material Coupling: back part, coupler body brass nickel plated. Valve brass. Sleeve aluminium anodised. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: brass nickel plated with anotised aluminium ring. Nominal width 5.0 mm, brass, surface: nickel plated, single shut off, male thread DIN228/1, 1/4, seal: NBR (Perbunan)
Nominal Width: 5 mm 5 Connection:  1/4 1/4 Flow Rate: 600 l/min 600