6 products found.
SERIES 126.00
plug,
Article: OMFC0
Nominal width 7.8 mm, material: steel, surface: zinc-plated, connection type: male thread DIN2999 (BSPT), connection size: 3/8 One-hand coupling with automatic 5-point locking. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back into the direction of the connection. The valve will return to its starting position and pushes the plug out of the coupling. Material coupling: back part and body are made of brass nickel plated. Valve brass. Sleeve steel hardend nickel plated. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: steel hardend zink plated. Nominal width 7.8 mm, steel, surface: zinc-plated, male thread DIN2999 (BSPT), 3/8
7.8 |
3/8 |
2,030 |
SERIES 126.H0
plug,
protected with second groove,
Article: NMS10
Nominal width 7.8 mm, material: steel, surface: zinc-plated, connection type: female thread DIN228/1 (BSP), connection size: 1/4 Two-hand coupling with automatic 5-point locking. Locking elements are balls which are locked by a spring-loaded unlocking sleeve. In order to avoid unintentional uncoupling, the unlocking process is only possible by deliberately pressing the plug into the coupling. This is the only way to free the locking elements and to move the unlocking sleeve in the direction of the connection so that the plug can be removed from the coupling. The valve moves back to its original position and closes the couling. Material coupling: back part, coupler body, sleeve brass nickel plated. Valve brass. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: steel hardened zink plated. Nominal width 7.8 mm, steel, surface: zinc-plated, female thread DIN228/1 (BSP), 1/4
|
7.8 |
1/4 |
2,030 |
SERIES 126.H0
coupling,
protected with second groove,
Article: N8750
Nominal width 7.8 mm, material: brass, surface: nickel plated, single shut off, connection type: hose connection, connection size: LW9, seal: FPM (Viton) Two-hand coupling with automatic 5-point locking. Locking elements are balls which are locked by a spring-loaded unlocking sleeve. In order to avoid unintentional uncoupling, the unlocking process is only possible by deliberately pressing the plug into the coupling. This is the only way to free the locking elements and to move the unlocking sleeve in the direction of the connection so that the plug can be removed from the coupling. The valve moves back to its original position and closes the couling. Material coupling: back part, coupler body, sleeve brass nickel plated. Valve brass. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: steel hardened zink plated. Nominal width 7.8 mm, brass, surface: nickel plated, single shut off, hose connection, LW9, seal: FPM (Viton)
|
7.8 |
LW9 |
2,030 |
SERIES 126.H0
plug,
protected with second groove,
Article: NMT00
Nominal width 7.8 mm, material: 1.4305, connection type: male thread DIN2999 (BSPT), connection size: 1/4 Two-hand coupling with automatic 5-point locking. Locking elements are balls which are locked by a spring-loaded unlocking sleeve. In order to avoid unintentional uncoupling, the unlocking process is only possible by deliberately pressing the plug into the coupling. This is the only way to free the locking elements and to move the unlocking sleeve in the direction of the connection so that the plug can be removed from the coupling. The valve moves back to its original position and closes the couling. Material coupling: back part, coupler body, sleeve brass nickel plated. Valve brass. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: steel hardened zink plated. Nominal width 7.8 mm, 1.4305, male thread DIN2999 (BSPT), 1/4
|
7.8 |
1/4 |
2,030 |
SERIES 090.00
coupling,
Article: NF0J0
Nominal width 5.0 mm, material: 1.4305, single shut off, connection type: male thread DIN228/1, connection size: 1/8, seal: FPM (Viton) One-hand coupling with automatic 5-point locking. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back into the direction of the connection. The valve will return to its starting position and pushes the plug out of the coupling. Material coupling and plug: back part, sleeve, coupler body, valve and plug stainless steel AISI 303. Seal FPM (Viton). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 316. Material plug: stainless steel AISI 303 Nominal width 5.0 mm, 1.4305, single shut off, male thread DIN228/1, 1/8, seal: FPM (Viton)
|
5 |
1/8 |
600 |
SERIES 126.00
plug,
Article: OMFA0
Nominal width 7.8 mm, material: steel, surface: zinc-plated, connection type: male thread DIN2999 (BSPT), connection size: 1/8 One-hand coupling with automatic 5-point locking. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back into the direction of the connection. The valve will return to its starting position and pushes the plug out of the coupling. Material coupling: back part and body are made of brass nickel plated. Valve brass. Sleeve steel hardend nickel plated. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: steel hardend zink plated. Nominal width 7.8 mm, steel, surface: zinc-plated, male thread DIN2999 (BSPT), 1/8
|
7.8 |
1/8 |
2,030 |