Image similar to the original
SERIES
152.00
plug
Technique: One-hand coupling with automatic 6-point locking. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back into the direction of the connection. The valve will return to its starting position and push the plug out of the coupling.
Technical Characteristics: Material coupling: back part and body are made of brass nickel plated. Valve brass. Sleeve steel hardend nickel plated. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: steel hardend zink plated.
| Series | 152 |
|---|---|
| Nominal Width | 10 mm |
| Type | plug |
| Surface | zinc-plated |
| Material | steel |
| Connection Size | hose connection |
| Connection Type | LW19 |
| Operating Temperature | from -20 °C to 100 °C |
| Pressure Range max. | 35 bar |
| Flow Rate | 3,050 l/min |
| Handling | One-hand coupling |
| Vacuum suitable 0.95 bar | Yes |
| Options | Coupling available with other seals on request. |
 |
Dimensions / Details
|
Fitting Products |
||||
 |
Series 152.F0 |
Article N86R0 coupling |
Beschreibung Nominal width 10.0 mm, brass, surface: nickel plated, single shut off, male thread DIN228/1, 1/2, seal: NBR (Perbunan) |
|
 |
Series 152.F0 |
Article N86U0 coupling |
Beschreibung Nominal width 10.0 mm, brass, surface: nickel plated, single shut off, male thread DIN2999 (BSPT), 3/4, seal: NBR (Perbunan) |
|
 |
Series 152.F0 |
Article N86X0 coupling |
Beschreibung Nominal width 10.0 mm, brass, surface: nickel plated, single shut off, female thread DIN228/1 (BSP), 1/2, seal: NBR (Perbunan) |
|