STEINCONNECTOR product search

€0.00*
Categories
Filter
55 products found.
SERIES 100.C0
coupling, self venting coupling, Article: N76M0
Image similar to the original Article: N76M0, Nominal Width|7.8 mm, Connection| 1/2, Flow Rate|1,350 l/min
Nominal width 7.8 mm, material: brass, surface: nickel plated, single shut off, connection type: male thread DIN228/1, connection size: 1/2, seal: NBR (Perbunan) Safety bleed valve meets DIN EN ISO 4414 requirements for pneumatic systems. The coupling has an ergonomic grippy slide valve with three functions: 1. Automatic locking of the plug. 2. Switch to the venting state. 3. Unlock the coupling from the vented state. * in points 1 and 2, the movement sequences are carried out under operating pressure. To connect plug and coupling, the plug has to be pressed into the locked state against the pressurized valve. To release the pressurized connection, the release sleeve has to be phushed into direction of the coupling. The plug moves automaticly from the locked into the vented state and the compressed air still present on the plug side can be vented through the coupling. Only now can the plug be safely removed by pulling back the release sleeve. Material coupling: back part, sleeve, coupler body brass nickel plated. Valve brass. Support washer and sleeve-cover plastic. Seal NBR (Buna N) spring and circlip stainless steel AISI 301. Bolts and balls stainless steel AISI 420. Material plug: steel hardend zink plated Nominal width 7.8 mm, brass, surface: nickel plated, single shut off, male thread DIN228/1, 1/2, seal: NBR (Perbunan)
Nominal Width: 7.8 mm 7.8 Connection: 1/2 1/2 Flow Rate: 1,350 l/min 1,350
more Details
SERIES 12S.C0
coupling, self venting coupling, Article: N84R0
Image similar to the original Article: N84R0, Nominal Width|7.8 mm, Connection| 1/2, Flow Rate|2,080 l/min
Nominal width 7.8 mm, material: brass, surface: nickel plated, single shut off, connection type: male thread DIN228/1, connection size: 1/2, seal: NBR (Perbunan) Safety bleed valve meets DIN EN ISO 4414 requirements for pneumatic systems. The coupling has an ergonomic grippy slide valve with three functions: 1. Automatic locking of the plug. 2. Switch to the venting state. 3. Unlock the coupling from the vented state. * in points 1 and 2, the movement sequences are carried out under operating pressure. To connect plug and coupling, the plug has to be pressed into the locked state against the pressurized valve. To release the pressurized connection, the release sleeve has to be phushed into direction of the coupling. The plug moves automaticly from the locked into the vented state and the compressed air still present on the plug side can be vented through the coupling. Only now can the plug be safely removed by pulling back the release sleeve. Material coupling: back part, coupler body and valve brass nickel plated. Sleeve, sleeve-cover, support washer plastic. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material Plug: steel hardend zink plated Nominal width 7.8 mm, brass, surface: nickel plated, single shut off, male thread DIN228/1, 1/2, seal: NBR (Perbunan)
Nominal Width: 7.8 mm 7.8 Connection: 1/2 1/2 Flow Rate: 2,080 l/min 2,080
more Details
SERIES 12S.C0
coupling, self venting coupling, Article: N9AC0
Image similar to the original Article: N9AC0, Nominal Width|7.8 mm, Connection| 3/8, Flow Rate|2,080 l/min
Nominal width 7.8 mm, material: brass, surface: nickel plated, single shut off, connection type: male thread DIN228/1, connection size: 3/8, seal: NBR (Perbunan) Safety bleed valve meets DIN EN ISO 4414 requirements for pneumatic systems. The coupling has an ergonomic grippy slide valve with three functions: 1. Automatic locking of the plug. 2. Switch to the venting state. 3. Unlock the coupling from the vented state. * in points 1 and 2, the movement sequences are carried out under operating pressure. To connect plug and coupling, the plug has to be pressed into the locked state against the pressurized valve. To release the pressurized connection, the release sleeve has to be phushed into direction of the coupling. The plug moves automaticly from the locked into the vented state and the compressed air still present on the plug side can be vented through the coupling. Only now can the plug be safely removed by pulling back the release sleeve. Material coupling: back part, coupler body and valve brass nickel plated. Sleeve, sleeve-cover, support washer plastic. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material Plug: steel hardend zink plated Nominal width 7.8 mm, brass, surface: nickel plated, single shut off, male thread DIN228/1, 3/8, seal: NBR (Perbunan)
Nominal Width: 7.8 mm 7.8 Connection: 3/8 3/8 Flow Rate: 2,080 l/min 2,080
more Details
SERIES 12S.C0
coupling, self venting coupling, Article: N9AF0
Image similar to the original Article: N9AF0, Nominal Width|7.8 mm, Connection| 3/8, Flow Rate|2,080 l/min
Nominal width 7.8 mm, material: brass, surface: nickel plated, single shut off, connection type: female thread DIN228/1 (BSP), connection size: 3/8, seal: NBR (Perbunan) Safety bleed valve meets DIN EN ISO 4414 requirements for pneumatic systems. The coupling has an ergonomic grippy slide valve with three functions: 1. Automatic locking of the plug. 2. Switch to the venting state. 3. Unlock the coupling from the vented state. * in points 1 and 2, the movement sequences are carried out under operating pressure. To connect plug and coupling, the plug has to be pressed into the locked state against the pressurized valve. To release the pressurized connection, the release sleeve has to be phushed into direction of the coupling. The plug moves automaticly from the locked into the vented state and the compressed air still present on the plug side can be vented through the coupling. Only now can the plug be safely removed by pulling back the release sleeve. Material coupling: back part, coupler body and valve brass nickel plated. Sleeve, sleeve-cover, support washer plastic. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material Plug: steel hardend zink plated Nominal width 7.8 mm, brass, surface: nickel plated, single shut off, female thread DIN228/1 (BSP), 3/8, seal: NBR (Perbunan)
Nominal Width: 7.8 mm 7.8 Connection: 3/8 3/8 Flow Rate: 2,080 l/min 2,080
more Details
SERIES 100.C0
coupling, self venting coupling, Article: N77C0
Image similar to the original Article: N77C0, Nominal Width|7.8 mm, Connection| 1/2, Flow Rate|1,350 l/min
Nominal width 7.8 mm, material: brass, surface: nickel plated, single shut off, connection type: female thread DIN228/1 (BSP), connection size: 1/2, seal: NBR (Perbunan) Safety bleed valve meets DIN EN ISO 4414 requirements for pneumatic systems. The coupling has an ergonomic grippy slide valve with three functions: 1. Automatic locking of the plug. 2. Switch to the venting state. 3. Unlock the coupling from the vented state. * in points 1 and 2, the movement sequences are carried out under operating pressure. To connect plug and coupling, the plug has to be pressed into the locked state against the pressurized valve. To release the pressurized connection, the release sleeve has to be phushed into direction of the coupling. The plug moves automaticly from the locked into the vented state and the compressed air still present on the plug side can be vented through the coupling. Only now can the plug be safely removed by pulling back the release sleeve. Material coupling: back part, sleeve, coupler body brass nickel plated. Valve brass. Support washer and sleeve-cover plastic. Seal NBR (Buna N) spring and circlip stainless steel AISI 301. Bolts and balls stainless steel AISI 420. Material plug: steel hardend zink plated Nominal width 7.8 mm, brass, surface: nickel plated, single shut off, female thread DIN228/1 (BSP), 1/2, seal: NBR (Perbunan)
Nominal Width: 7.8 mm 7.8 Connection: 1/2 1/2 Flow Rate: 1,350 l/min 1,350
more Details
SERIES 100.C0
coupling, self venting coupling, Article: N77H0
Image similar to the original Article: N77H0, Nominal Width|7.8 mm, Connection| 1/4, Flow Rate|1,350 l/min
Nominal width 7.8 mm, material: brass, surface: nickel plated, single shut off, connection type: male thread DIN228/1, connection size: 1/4, seal: NBR (Perbunan) Safety bleed valve meets DIN EN ISO 4414 requirements for pneumatic systems. The coupling has an ergonomic grippy slide valve with three functions: 1. Automatic locking of the plug. 2. Switch to the venting state. 3. Unlock the coupling from the vented state. * in points 1 and 2, the movement sequences are carried out under operating pressure. To connect plug and coupling, the plug has to be pressed into the locked state against the pressurized valve. To release the pressurized connection, the release sleeve has to be phushed into direction of the coupling. The plug moves automaticly from the locked into the vented state and the compressed air still present on the plug side can be vented through the coupling. Only now can the plug be safely removed by pulling back the release sleeve. Material coupling: back part, sleeve, coupler body brass nickel plated. Valve brass. Support washer and sleeve-cover plastic. Seal NBR (Buna N) spring and circlip stainless steel AISI 301. Bolts and balls stainless steel AISI 420. Material plug: steel hardend zink plated Nominal width 7.8 mm, brass, surface: nickel plated, single shut off, male thread DIN228/1, 1/4, seal: NBR (Perbunan)
Nominal Width: 7.8 mm 7.8 Connection: 1/4 1/4 Flow Rate: 1,350 l/min 1,350
more Details
SERIES 12S.C0
coupling, self venting coupling, Article: N9AK0
Image similar to the original Article: N9AK0, Nominal Width|7.8 mm, Connection|LW13, Flow Rate|2,080 l/min
Nominal width 7.8 mm, material: brass, surface: nickel plated, single shut off, connection type: hose connection, connection size: LW13, seal: NBR (Perbunan) Safety bleed valve meets DIN EN ISO 4414 requirements for pneumatic systems. The coupling has an ergonomic grippy slide valve with three functions: 1. Automatic locking of the plug. 2. Switch to the venting state. 3. Unlock the coupling from the vented state. * in points 1 and 2, the movement sequences are carried out under operating pressure. To connect plug and coupling, the plug has to be pressed into the locked state against the pressurized valve. To release the pressurized connection, the release sleeve has to be phushed into direction of the coupling. The plug moves automaticly from the locked into the vented state and the compressed air still present on the plug side can be vented through the coupling. Only now can the plug be safely removed by pulling back the release sleeve. Material coupling: back part, coupler body and valve brass nickel plated. Sleeve, sleeve-cover, support washer plastic. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material Plug: steel hardend zink plated Nominal width 7.8 mm, brass, surface: nickel plated, single shut off, hose connection, LW13, seal: NBR (Perbunan)
Nominal Width: 7.8 mm 7.8 Connection: LW13 LW13 Flow Rate: 2,080 l/min 2,080
more Details
SERIES 12S.C0
coupling, self venting coupling, Article: N9AH0
Image similar to the original Article: N9AH0, Nominal Width|7.8 mm, Connection|LW6, Flow Rate|2,080 l/min
Nominal width 7.8 mm, material: brass, surface: nickel plated, single shut off, connection type: hose connection, connection size: LW6, seal: NBR (Perbunan) Safety bleed valve meets DIN EN ISO 4414 requirements for pneumatic systems. The coupling has an ergonomic grippy slide valve with three functions: 1. Automatic locking of the plug. 2. Switch to the venting state. 3. Unlock the coupling from the vented state. * in points 1 and 2, the movement sequences are carried out under operating pressure. To connect plug and coupling, the plug has to be pressed into the locked state against the pressurized valve. To release the pressurized connection, the release sleeve has to be phushed into direction of the coupling. The plug moves automaticly from the locked into the vented state and the compressed air still present on the plug side can be vented through the coupling. Only now can the plug be safely removed by pulling back the release sleeve. Material coupling: back part, coupler body and valve brass nickel plated. Sleeve, sleeve-cover, support washer plastic. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material Plug: steel hardend zink plated Nominal width 7.8 mm, brass, surface: nickel plated, single shut off, hose connection, LW6, seal: NBR (Perbunan)
Nominal Width: 7.8 mm 7.8 Connection: LW6 LW6 Flow Rate: 2,080 l/min 2,080
more Details
SERIES 12S.C0
coupling, self venting coupling, Article: N84F0
Image similar to the original Article: N84F0, Nominal Width|7.8 mm, Connection| 1/4, Flow Rate|2,080 l/min
Nominal width 7.8 mm, material: brass, surface: nickel plated, single shut off, connection type: male thread DIN228/1, connection size: 1/4, seal: NBR (Perbunan) Safety bleed valve meets DIN EN ISO 4414 requirements for pneumatic systems. The coupling has an ergonomic grippy slide valve with three functions: 1. Automatic locking of the plug. 2. Switch to the venting state. 3. Unlock the coupling from the vented state. * in points 1 and 2, the movement sequences are carried out under operating pressure. To connect plug and coupling, the plug has to be pressed into the locked state against the pressurized valve. To release the pressurized connection, the release sleeve has to be phushed into direction of the coupling. The plug moves automaticly from the locked into the vented state and the compressed air still present on the plug side can be vented through the coupling. Only now can the plug be safely removed by pulling back the release sleeve. Material coupling: back part, coupler body and valve brass nickel plated. Sleeve, sleeve-cover, support washer plastic. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material Plug: steel hardend zink plated Nominal width 7.8 mm, brass, surface: nickel plated, single shut off, male thread DIN228/1, 1/4, seal: NBR (Perbunan)
Nominal Width: 7.8 mm 7.8 Connection: 1/4 1/4 Flow Rate: 2,080 l/min 2,080
more Details
SERIES 100.C0
coupling, self venting coupling, Article: N77P0
Image similar to the original Article: N77P0, Nominal Width|7.8 mm, Connection|LW8, Flow Rate|1,350 l/min
Nominal width 7.8 mm, material: brass, surface: nickel plated, single shut off, connection type: hose connection, connection size: LW8, seal: NBR (Perbunan) Safety bleed valve meets DIN EN ISO 4414 requirements for pneumatic systems. The coupling has an ergonomic grippy slide valve with three functions: 1. Automatic locking of the plug. 2. Switch to the venting state. 3. Unlock the coupling from the vented state. * in points 1 and 2, the movement sequences are carried out under operating pressure. To connect plug and coupling, the plug has to be pressed into the locked state against the pressurized valve. To release the pressurized connection, the release sleeve has to be phushed into direction of the coupling. The plug moves automaticly from the locked into the vented state and the compressed air still present on the plug side can be vented through the coupling. Only now can the plug be safely removed by pulling back the release sleeve. Material coupling: back part, sleeve, coupler body brass nickel plated. Valve brass. Support washer and sleeve-cover plastic. Seal NBR (Buna N) spring and circlip stainless steel AISI 301. Bolts and balls stainless steel AISI 420. Material plug: steel hardend zink plated Nominal width 7.8 mm, brass, surface: nickel plated, single shut off, hose connection, LW8, seal: NBR (Perbunan)
Nominal Width: 7.8 mm 7.8 Connection: LW8 LW8 Flow Rate: 1,350 l/min 1,350
more Details
SERIES 100.C0
coupling, self venting coupling, Article: N7960
Image similar to the original Article: N7960, Nominal Width|7.8 mm, Connection|LW10, Flow Rate|1,350 l/min
Nominal width 7.8 mm, material: brass, surface: nickel plated, single shut off, connection type: hose connection, connection size: LW10, seal: NBR (Perbunan) Safety bleed valve meets DIN EN ISO 4414 requirements for pneumatic systems. The coupling has an ergonomic grippy slide valve with three functions: 1. Automatic locking of the plug. 2. Switch to the venting state. 3. Unlock the coupling from the vented state. * in points 1 and 2, the movement sequences are carried out under operating pressure. To connect plug and coupling, the plug has to be pressed into the locked state against the pressurized valve. To release the pressurized connection, the release sleeve has to be phushed into direction of the coupling. The plug moves automaticly from the locked into the vented state and the compressed air still present on the plug side can be vented through the coupling. Only now can the plug be safely removed by pulling back the release sleeve. Material coupling: back part, sleeve, coupler body brass nickel plated. Valve brass. Support washer and sleeve-cover plastic. Seal NBR (Buna N) spring and circlip stainless steel AISI 301. Bolts and balls stainless steel AISI 420. Material plug: steel hardend zink plated Nominal width 7.8 mm, brass, surface: nickel plated, single shut off, hose connection, LW10, seal: NBR (Perbunan)
Nominal Width: 7.8 mm 7.8 Connection: LW10 LW10 Flow Rate: 1,350 l/min 1,350
more Details
SERIES 100.C0
coupling, self venting coupling, Article: N77R0
Image similar to the original Article: N77R0, Nominal Width|7.8 mm, Connection|LW10, Flow Rate|1,350 l/min
Nominal width 7.8 mm, material: brass, surface: nickel plated, single shut off, connection type: hose connection, connection size: LW10, seal: NBR (Perbunan) Safety bleed valve meets DIN EN ISO 4414 requirements for pneumatic systems. The coupling has an ergonomic grippy slide valve with three functions: 1. Automatic locking of the plug. 2. Switch to the venting state. 3. Unlock the coupling from the vented state. * in points 1 and 2, the movement sequences are carried out under operating pressure. To connect plug and coupling, the plug has to be pressed into the locked state against the pressurized valve. To release the pressurized connection, the release sleeve has to be phushed into direction of the coupling. The plug moves automaticly from the locked into the vented state and the compressed air still present on the plug side can be vented through the coupling. Only now can the plug be safely removed by pulling back the release sleeve. Material coupling: back part, sleeve, coupler body brass nickel plated. Valve brass. Support washer and sleeve-cover plastic. Seal NBR (Buna N) spring and circlip stainless steel AISI 301. Bolts and balls stainless steel AISI 420. Material plug: steel hardend zink plated Nominal width 7.8 mm, brass, surface: nickel plated, single shut off, hose connection, LW10, seal: NBR (Perbunan)
Nominal Width: 7.8 mm 7.8 Connection: LW10 LW10 Flow Rate: 1,350 l/min 1,350
more Details
SERIES 110.C0
coupling, self venting coupling, Article: N7770
Image similar to the original Article: N7770, Nominal Width|5.5 mm, Connection| 1/8, Flow Rate|680 l/min
Nominal width 5.5 mm, material: brass, surface: nickel plated, single shut off, connection type: male thread DIN228/1, connection size: 1/8, seal: NBR (Perbunan) Safety bleed valve meets DIN EN ISO 4414 requirements for pneumatic systems. The coupling has an ergonomic grippy slide valve with three functions: 1. Automatic locking of the plug. 2. Switch to the venting state. 3. Unlock the coupling from the vented state. * in points 1 and 2, the movement sequences are carried out under operating pressure. To connect plug and coupling, the plug has to be pressed into the locked state against the pressurized valve. To release the pressurized connection, the release sleeve has to be phushed into direction of the coupling. The plug moves automaticly from the locked into the vented state and the compressed air still present on the plug side can be vented through the coupling. Only now can the plug be safely removed by pulling back the release sleeve. Material coupling: back part, sleeve, coupler body brass nickel plated. Valve brass. Support washer and sleeve-cover plastic. Seal NBR (Buna N) spring and circlip stainless steel AISI 301. Bolts and balls stainless steel AISI 420. Material plug: steel hardend zink plated Nominal width 5.5 mm, brass, surface: nickel plated, single shut off, male thread DIN228/1, 1/8, seal: NBR (Perbunan)Steinconnector S122, Rectus 14 + 22, ARO 210, Parker 50, CEJN 300, ORION 44510, JWL 552 + JWL 532, div. Schweizer Fabrikate
Nominal Width: 5.5 mm 5.5 Connection: 1/8 1/8 Flow Rate: 680 l/min 680
more Details
SERIES 120.C0
coupling, self venting coupling, Article: N78Y0
Image similar to the original Article: N78Y0, Nominal Width|5.5 mm, Connection|LW8, Flow Rate|680 l/min
Nominal width 5.5 mm, material: brass, surface: nickel plated, single shut off, connection type: hose connection, connection size: LW8, seal: NBR (Perbunan) Safety bleed valve meets DIN EN ISO 4414 requirements for pneumatic systems. The coupling has an ergonomic grippy slide valve with three functions: 1. Automatic locking of the plug. 2. Switch to the venting state. 3. Unlock the coupling from the vented state. * in points 1 and 2, the movement sequences are carried out under operating pressure. To connect plug and coupling, the plug has to be pressed into the locked state against the pressurized valve. To release the pressurized connection, the release sleeve has to be phushed into direction of the coupling. The plug moves automaticly from the locked into the vented state and the compressed air still present on the plug side can be vented through the coupling. Only now can the plug be safely removed by pulling back the release sleeve. Material coupling: back part, sleeve, coupler body brass nickel plated. Valve brass. Support washer and sleeve-cover plastic. Seal NBR (Buna N) spring and circlip stainless steel AISI 301. Bolts and balls stainless steel AISI 420. Material plug: steel hardend zink plated Nominal width 5.5 mm, brass, surface: nickel plated, single shut off, hose connection, LW8, seal: NBR (Perbunan)Steinconnector 123, Industr. Interchange 1/4″, US-MIL-SPEC-C-4109, ISO 6150 B, Rectus 23 + 24, Rectus 1400/1423, Tema 1400, Cejn 310, Hansen 3000, Faster, Gromelle 600, Parker 20 1/4″ + 30 1/4″, JWL 521 + JWL 531
Nominal Width: 5.5 mm 5.5 Connection: LW8 LW8 Flow Rate: 680 l/min 680
more Details
SERIES 120.C0
coupling, self venting coupling, Article: N7800
Image similar to the original Article: N7800, Nominal Width|5.5 mm, Connection|LW10, Flow Rate|680 l/min
Nominal width 5.5 mm, material: brass, surface: nickel plated, single shut off, connection type: hose connection, connection size: LW10, seal: NBR (Perbunan) Safety bleed valve meets DIN EN ISO 4414 requirements for pneumatic systems. The coupling has an ergonomic grippy slide valve with three functions: 1. Automatic locking of the plug. 2. Switch to the venting state. 3. Unlock the coupling from the vented state. * in points 1 and 2, the movement sequences are carried out under operating pressure. To connect plug and coupling, the plug has to be pressed into the locked state against the pressurized valve. To release the pressurized connection, the release sleeve has to be phushed into direction of the coupling. The plug moves automaticly from the locked into the vented state and the compressed air still present on the plug side can be vented through the coupling. Only now can the plug be safely removed by pulling back the release sleeve. Material coupling: back part, sleeve, coupler body brass nickel plated. Valve brass. Support washer and sleeve-cover plastic. Seal NBR (Buna N) spring and circlip stainless steel AISI 301. Bolts and balls stainless steel AISI 420. Material plug: steel hardend zink plated Nominal width 5.5 mm, brass, surface: nickel plated, single shut off, hose connection, LW10, seal: NBR (Perbunan)Steinconnector 123, Industr. Interchange 1/4″, US-MIL-SPEC-C-4109, ISO 6150 B, Rectus 23 + 24, Rectus 1400/1423, Tema 1400, Cejn 310, Hansen 3000, Faster, Gromelle 600, Parker 20 1/4″ + 30 1/4″, JWL 521 + JWL 531
Nominal Width: 5.5 mm 5.5 Connection: LW10 LW10 Flow Rate: 680 l/min 680
more Details
SERIES 110.C0
coupling, self venting coupling, Article: N78B0
Image similar to the original Article: N78B0, Nominal Width|5.5 mm, Connection|LW8, Flow Rate|680 l/min
Nominal width 5.5 mm, material: brass, surface: nickel plated, single shut off, connection type: hose connection, connection size: LW8, seal: NBR (Perbunan) Safety bleed valve meets DIN EN ISO 4414 requirements for pneumatic systems. The coupling has an ergonomic grippy slide valve with three functions: 1. Automatic locking of the plug. 2. Switch to the venting state. 3. Unlock the coupling from the vented state. * in points 1 and 2, the movement sequences are carried out under operating pressure. To connect plug and coupling, the plug has to be pressed into the locked state against the pressurized valve. To release the pressurized connection, the release sleeve has to be phushed into direction of the coupling. The plug moves automaticly from the locked into the vented state and the compressed air still present on the plug side can be vented through the coupling. Only now can the plug be safely removed by pulling back the release sleeve. Material coupling: back part, sleeve, coupler body brass nickel plated. Valve brass. Support washer and sleeve-cover plastic. Seal NBR (Buna N) spring and circlip stainless steel AISI 301. Bolts and balls stainless steel AISI 420. Material plug: steel hardend zink plated Nominal width 5.5 mm, brass, surface: nickel plated, single shut off, hose connection, LW8, seal: NBR (Perbunan)Steinconnector S122, Rectus 14 + 22, ARO 210, Parker 50, CEJN 300, ORION 44510, JWL 552 + JWL 532, div. Schweizer Fabrikate
Nominal Width: 5.5 mm 5.5 Connection: LW8 LW8 Flow Rate: 680 l/min 680
more Details
SERIES 110.C0
coupling, self venting coupling, Article: N7750
Image similar to the original Article: N7750, Nominal Width|5.5 mm, Connection| 1/4, Flow Rate|680 l/min
Nominal width 5.5 mm, material: brass, surface: nickel plated, single shut off, connection type: female thread DIN228/1 (BSP), connection size: 1/4, seal: NBR (Perbunan) Safety bleed valve meets DIN EN ISO 4414 requirements for pneumatic systems. The coupling has an ergonomic grippy slide valve with three functions: 1. Automatic locking of the plug. 2. Switch to the venting state. 3. Unlock the coupling from the vented state. * in points 1 and 2, the movement sequences are carried out under operating pressure. To connect plug and coupling, the plug has to be pressed into the locked state against the pressurized valve. To release the pressurized connection, the release sleeve has to be phushed into direction of the coupling. The plug moves automaticly from the locked into the vented state and the compressed air still present on the plug side can be vented through the coupling. Only now can the plug be safely removed by pulling back the release sleeve. Material coupling: back part, sleeve, coupler body brass nickel plated. Valve brass. Support washer and sleeve-cover plastic. Seal NBR (Buna N) spring and circlip stainless steel AISI 301. Bolts and balls stainless steel AISI 420. Material plug: steel hardend zink plated Nominal width 5.5 mm, brass, surface: nickel plated, single shut off, female thread DIN228/1 (BSP), 1/4, seal: NBR (Perbunan)Steinconnector S122, Rectus 14 + 22, ARO 210, Parker 50, CEJN 300, ORION 44510, JWL 552 + JWL 532, div. Schweizer Fabrikate
Nominal Width: 5.5 mm 5.5 Connection: 1/4 1/4 Flow Rate: 680 l/min 680
more Details
SERIES 100.C0
coupling, self venting coupling, Article: N77A0
Image similar to the original Article: N77A0, Nominal Width|7.8 mm, Connection| 1/8, Flow Rate|1,350 l/min
Nominal width 7.8 mm, material: brass, surface: nickel plated, single shut off, connection type: female thread DIN228/1 (BSP), connection size: 1/8, seal: NBR (Perbunan) Safety bleed valve meets DIN EN ISO 4414 requirements for pneumatic systems. The coupling has an ergonomic grippy slide valve with three functions: 1. Automatic locking of the plug. 2. Switch to the venting state. 3. Unlock the coupling from the vented state. * in points 1 and 2, the movement sequences are carried out under operating pressure. To connect plug and coupling, the plug has to be pressed into the locked state against the pressurized valve. To release the pressurized connection, the release sleeve has to be phushed into direction of the coupling. The plug moves automaticly from the locked into the vented state and the compressed air still present on the plug side can be vented through the coupling. Only now can the plug be safely removed by pulling back the release sleeve. Material coupling: back part, sleeve, coupler body brass nickel plated. Valve brass. Support washer and sleeve-cover plastic. Seal NBR (Buna N) spring and circlip stainless steel AISI 301. Bolts and balls stainless steel AISI 420. Material plug: steel hardend zink plated Nominal width 7.8 mm, brass, surface: nickel plated, single shut off, female thread DIN228/1 (BSP), 1/8, seal: NBR (Perbunan)
Nominal Width: 7.8 mm 7.8 Connection: 1/8 1/8 Flow Rate: 1,350 l/min 1,350
more Details
SERIES 100.C0
coupling, self venting coupling, Article: N77Q0
Image similar to the original Article: N77Q0, Nominal Width|7.8 mm, Connection|LW9, Flow Rate|1,350 l/min
Nominal width 7.8 mm, material: brass, surface: nickel plated, single shut off, connection type: hose connection, connection size: LW9, seal: NBR (Perbunan) Safety bleed valve meets DIN EN ISO 4414 requirements for pneumatic systems. The coupling has an ergonomic grippy slide valve with three functions: 1. Automatic locking of the plug. 2. Switch to the venting state. 3. Unlock the coupling from the vented state. * in points 1 and 2, the movement sequences are carried out under operating pressure. To connect plug and coupling, the plug has to be pressed into the locked state against the pressurized valve. To release the pressurized connection, the release sleeve has to be phushed into direction of the coupling. The plug moves automaticly from the locked into the vented state and the compressed air still present on the plug side can be vented through the coupling. Only now can the plug be safely removed by pulling back the release sleeve. Material coupling: back part, sleeve, coupler body brass nickel plated. Valve brass. Support washer and sleeve-cover plastic. Seal NBR (Buna N) spring and circlip stainless steel AISI 301. Bolts and balls stainless steel AISI 420. Material plug: steel hardend zink plated Nominal width 7.8 mm, brass, surface: nickel plated, single shut off, hose connection, LW9, seal: NBR (Perbunan)
Nominal Width: 7.8 mm 7.8 Connection: LW9 LW9 Flow Rate: 1,350 l/min 1,350
more Details
SERIES 12S.C0
coupling, self venting coupling, Article: N9AB0
Image similar to the original Article: N9AB0, Nominal Width|7.8 mm, Connection| 1/8, Flow Rate|2,080 l/min
Nominal width 7.8 mm, material: brass, surface: nickel plated, single shut off, connection type: male thread DIN228/1, connection size: 1/8, seal: NBR (Perbunan) Safety bleed valve meets DIN EN ISO 4414 requirements for pneumatic systems. The coupling has an ergonomic grippy slide valve with three functions: 1. Automatic locking of the plug. 2. Switch to the venting state. 3. Unlock the coupling from the vented state. * in points 1 and 2, the movement sequences are carried out under operating pressure. To connect plug and coupling, the plug has to be pressed into the locked state against the pressurized valve. To release the pressurized connection, the release sleeve has to be phushed into direction of the coupling. The plug moves automaticly from the locked into the vented state and the compressed air still present on the plug side can be vented through the coupling. Only now can the plug be safely removed by pulling back the release sleeve. Material coupling: back part, coupler body and valve brass nickel plated. Sleeve, sleeve-cover, support washer plastic. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material Plug: steel hardend zink plated Nominal width 7.8 mm, brass, surface: nickel plated, single shut off, male thread DIN228/1, 1/8, seal: NBR (Perbunan)
Nominal Width: 7.8 mm 7.8 Connection: 1/8 1/8 Flow Rate: 2,080 l/min 2,080
more Details
SERIES 120.C0
coupling, self venting coupling, Article: N78W0
Image similar to the original Article: N78W0, Nominal Width|5.5 mm, Connection| 3/8, Flow Rate|680 l/min
Nominal width 5.5 mm, material: brass, surface: nickel plated, single shut off, connection type: male thread DIN228/1, connection size: 3/8, seal: NBR (Perbunan) Safety bleed valve meets DIN EN ISO 4414 requirements for pneumatic systems. The coupling has an ergonomic grippy slide valve with three functions: 1. Automatic locking of the plug. 2. Switch to the venting state. 3. Unlock the coupling from the vented state. * in points 1 and 2, the movement sequences are carried out under operating pressure. To connect plug and coupling, the plug has to be pressed into the locked state against the pressurized valve. To release the pressurized connection, the release sleeve has to be phushed into direction of the coupling. The plug moves automaticly from the locked into the vented state and the compressed air still present on the plug side can be vented through the coupling. Only now can the plug be safely removed by pulling back the release sleeve. Material coupling: back part, sleeve, coupler body brass nickel plated. Valve brass. Support washer and sleeve-cover plastic. Seal NBR (Buna N) spring and circlip stainless steel AISI 301. Bolts and balls stainless steel AISI 420. Material plug: steel hardend zink plated Nominal width 5.5 mm, brass, surface: nickel plated, single shut off, male thread DIN228/1, 3/8, seal: NBR (Perbunan)Steinconnector 123, Industr. Interchange 1/4″, US-MIL-SPEC-C-4109, ISO 6150 B, Rectus 23 + 24, Rectus 1400/1423, Tema 1400, Cejn 310, Hansen 3000, Faster, Gromelle 600, Parker 20 1/4″ + 30 1/4″, JWL 521 + JWL 531
Nominal Width: 5.5 mm 5.5 Connection: 3/8 3/8 Flow Rate: 680 l/min 680
more Details
SERIES 110.C0
coupling, self venting coupling, Article: N76Y0
Image similar to the original Article: N76Y0, Nominal Width|5.5 mm, Connection| 3/8, Flow Rate|680 l/min
Nominal width 5.5 mm, material: brass, surface: nickel plated, single shut off, connection type: female thread DIN228/1 (BSP), connection size: 3/8, seal: NBR (Perbunan) Safety bleed valve meets DIN EN ISO 4414 requirements for pneumatic systems. The coupling has an ergonomic grippy slide valve with three functions: 1. Automatic locking of the plug. 2. Switch to the venting state. 3. Unlock the coupling from the vented state. * in points 1 and 2, the movement sequences are carried out under operating pressure. To connect plug and coupling, the plug has to be pressed into the locked state against the pressurized valve. To release the pressurized connection, the release sleeve has to be phushed into direction of the coupling. The plug moves automaticly from the locked into the vented state and the compressed air still present on the plug side can be vented through the coupling. Only now can the plug be safely removed by pulling back the release sleeve. Material coupling: back part, sleeve, coupler body brass nickel plated. Valve brass. Support washer and sleeve-cover plastic. Seal NBR (Buna N) spring and circlip stainless steel AISI 301. Bolts and balls stainless steel AISI 420. Material plug: steel hardend zink plated Nominal width 5.5 mm, brass, surface: nickel plated, single shut off, female thread DIN228/1 (BSP), 3/8, seal: NBR (Perbunan)Steinconnector S122, Rectus 14 + 22, ARO 210, Parker 50, CEJN 300, ORION 44510, JWL 552 + JWL 532, div. Schweizer Fabrikate
Nominal Width: 5.5 mm 5.5 Connection: 3/8 3/8 Flow Rate: 680 l/min 680
more Details
SERIES 120.C0
coupling, self venting coupling, Article: N78Z0
Image similar to the original Article: N78Z0, Nominal Width|5.5 mm, Connection|LW9, Flow Rate|680 l/min
Nominal width 5.5 mm, material: brass, surface: nickel plated, single shut off, connection type: hose connection, connection size: LW9, seal: NBR (Perbunan) Safety bleed valve meets DIN EN ISO 4414 requirements for pneumatic systems. The coupling has an ergonomic grippy slide valve with three functions: 1. Automatic locking of the plug. 2. Switch to the venting state. 3. Unlock the coupling from the vented state. * in points 1 and 2, the movement sequences are carried out under operating pressure. To connect plug and coupling, the plug has to be pressed into the locked state against the pressurized valve. To release the pressurized connection, the release sleeve has to be phushed into direction of the coupling. The plug moves automaticly from the locked into the vented state and the compressed air still present on the plug side can be vented through the coupling. Only now can the plug be safely removed by pulling back the release sleeve. Material coupling: back part, sleeve, coupler body brass nickel plated. Valve brass. Support washer and sleeve-cover plastic. Seal NBR (Buna N) spring and circlip stainless steel AISI 301. Bolts and balls stainless steel AISI 420. Material plug: steel hardend zink plated Nominal width 5.5 mm, brass, surface: nickel plated, single shut off, hose connection, LW9, seal: NBR (Perbunan)Steinconnector 123, Industr. Interchange 1/4″, US-MIL-SPEC-C-4109, ISO 6150 B, Rectus 23 + 24, Rectus 1400/1423, Tema 1400, Cejn 310, Hansen 3000, Faster, Gromelle 600, Parker 20 1/4″ + 30 1/4″, JWL 521 + JWL 531
Nominal Width: 5.5 mm 5.5 Connection: LW9 LW9 Flow Rate: 680 l/min 680
more Details
SERIES 100.C0
coupling, self venting coupling, Article: N77J0
Image similar to the original Article: N77J0, Nominal Width|7.8 mm, Connection| 3/8, Flow Rate|1,350 l/min
Nominal width 7.8 mm, material: brass, surface: nickel plated, single shut off, connection type: male thread DIN228/1, connection size: 3/8, seal: NBR (Perbunan) Safety bleed valve meets DIN EN ISO 4414 requirements for pneumatic systems. The coupling has an ergonomic grippy slide valve with three functions: 1. Automatic locking of the plug. 2. Switch to the venting state. 3. Unlock the coupling from the vented state. * in points 1 and 2, the movement sequences are carried out under operating pressure. To connect plug and coupling, the plug has to be pressed into the locked state against the pressurized valve. To release the pressurized connection, the release sleeve has to be phushed into direction of the coupling. The plug moves automaticly from the locked into the vented state and the compressed air still present on the plug side can be vented through the coupling. Only now can the plug be safely removed by pulling back the release sleeve. Material coupling: back part, sleeve, coupler body brass nickel plated. Valve brass. Support washer and sleeve-cover plastic. Seal NBR (Buna N) spring and circlip stainless steel AISI 301. Bolts and balls stainless steel AISI 420. Material plug: steel hardend zink plated Nominal width 7.8 mm, brass, surface: nickel plated, single shut off, male thread DIN228/1, 3/8, seal: NBR (Perbunan)
Nominal Width: 7.8 mm 7.8 Connection: 3/8 3/8 Flow Rate: 1,350 l/min 1,350
more Details