Image similar to the original
SERIES
100.00
plug
Reference Number: 100.00.ST00.AG012.30E
Technique: One-hand coupling with 2-point bolt locking. The uncoupling process is initiated by pushing back the unlocking sleeve into the direction of the connection. The valve moves back to its original position and pushes the plug out of the coupling.
Technical Characteristics: Material Coupling: back part, sleeve, coupler body and valve made of stainless steel AISI 303. Seals EPDM (ethylene propylene).Locking bolt made of stainless steel AISI 301. Springs and snap ring made of stainless steel AISI 316. Plug nipple material: Stainless steel AISI 303.
| Series | 100 |
|---|---|
| Nominal Width | 7.2 mm |
| Type | plug |
| Valve | flat face |
| Seal | EPDM (Buna EP) |
| Surface | nature |
| Material | 1.4305 |
| Connection Size | male thread DIN228/1 |
| Connection Type | 1/2 |
| Operating Temperature | from -20 °C to 100 °C |
| Pressure Range max. | 35 bar |
| Flow Rate | 600 l/min |
| Handling | One-hand coupling |
| Vacuum suitable 0.95 bar | Yes |
| Options | Coupling available with other seals on request. |
 |
Dimensions / Details
|
Fitting Products |
||||
 |
Series 100.00 |
Article N0YX6 coupling |
Beschreibung Nominal width 7.2 mm, 1.4305, single shut off, male thread DIN228/1, 1/2, seal: EPDM (Buna EP) |
|
 |
Series 100.00 |
Article N85B0 coupling |
Beschreibung Nominal width 7.2 mm, 1.4305, double shut off, female thread DIN228/1 (BSP), 1/4, seal: EPDM (Buna EP) |
|
 |
Series 100.00 |
Article N85A0 coupling |
Beschreibung Nominal width 7.2 mm, 1.4305, double shut off, hose connection, LW10, seal: EPDM (Buna EP) |
|