STEINCONNECTOR product search

Filter
38 products found.
SERIES 090.0A
plug, octagonal, Article: NYG30
Nominal width 5.0 mm, material: brass, surface: nickel plated, single shut off, connection type: female thread DIN228/1 (BSP), connection size: 1/8, seal: NBR (Perbunan) This one-hand coupling with automatic 5-point locking is used where a mixing up of medias has to be ruled out. Achieved this is done through a coding with simultaneous color labelling. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back in the direction of the connection. The valve will return to its starting position and push the plug out of the coupling. Material Coupling: back part, coupler body brass nickel plated. Valve brass. Sleeve aluminium anodised. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: brass nickel plated with anotised aluminium ring. Nominal width 5.0 mm, brass, surface: nickel plated, single shut off, female thread DIN228/1 (BSP), 1/8, seal: NBR (Perbunan)
Nominal Width: 5 mm 5 Connection:  1/8 1/8 Flow Rate: 600 l/min 600
SERIES 090.0S
plug, hexagonal, Article: NYG20
Nominal width 5.0 mm, material: brass, surface: nickel plated, connection type: female thread DIN228/1 (BSP), connection size: 1/8, seal: NBR (Perbunan) This one-hand coupling with automatic 5-point locking is used where a mixing up of medias has to be ruled out. Achieved this is done through a coding with simultaneous color labelling. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back in the direction of the connection. The valve will return to its starting position and push the plug out of the coupling. Material Coupling: back part, coupler body brass nickel plated. Valve brass. Sleeve aluminium anodised. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: brass nickel plated with anotised aluminium ring. Nominal width 5.0 mm, brass, surface: nickel plated, female thread DIN228/1 (BSP), 1/8, seal: NBR (Perbunan)
Nominal Width: 5 mm 5 Connection:  1/8 1/8 Flow Rate: 600 l/min 600
SERIES 100.00
plug, Article: NYA06
Nominal width 7.2 mm, material: 1.4404, surface: electropolish, flat face , connection type: hose connection, connection size: LW9, seal: FPM (Viton) One-hand coupling with 2-point bolt locking. The uncoupling process is initiated by pushing back the unlocking sleeve into the direction of the connection. The valve moves back to its original position and pushes the plug out of the coupling. Material Coupling: back part, sleeve, coupler body and valve are made of stainless steel AISI 316. Seal FPM (Viton). Spring and circlip stainless steel AISI 316. Bolts stainless steel AISI 316. Material plug: stainless steel AISI 316 Nominal width 7.2 mm, 1.4404, surface: electropolish, flat face , hose connection, LW9, seal: FPM (Viton)
Nominal Width: 7.2 mm 7.2 Connection: LW9 LW9 Flow Rate: 1,375 l/min 1,375
SERIES 100.00
coupling, Article: N79Q0
Nominal width 7.2 mm, material: 1.4404, surface: electropolish, single shut off, connection type: female thread DIN228/1 (BSP), connection size: 1/2, seal: FPM (Viton) One-hand coupling with 2-point bolt locking. The uncoupling process is initiated by pushing back the unlocking sleeve into the direction of the connection. The valve moves back to its original position and pushes the plug out of the coupling. Material Coupling: back part, sleeve, coupler body and valve are made of stainless steel AISI 316. Seal FPM (Viton). Spring and circlip stainless steel AISI 316. Bolts stainless steel AISI 316. Material plug: stainless steel AISI 316 Nominal width 7.2 mm, 1.4404, surface: electropolish, single shut off, female thread DIN228/1 (BSP), 1/2, seal: FPM (Viton)
Nominal Width: 7.2 mm 7.2 Connection:  1/2 1/2 Flow Rate: 1,375 l/min 1,375
SERIES 100.00
coupling, Article: N79T0
Nominal width 7.2 mm, material: 1.4404, surface: electropolish, single shut off, connection type: male thread DIN228/1, connection size: 1/2, seal: FPM (Viton) One-hand coupling with 2-point bolt locking. The uncoupling process is initiated by pushing back the unlocking sleeve into the direction of the connection. The valve moves back to its original position and pushes the plug out of the coupling. Material Coupling: back part, sleeve, coupler body and valve are made of stainless steel AISI 316. Seal FPM (Viton). Spring and circlip stainless steel AISI 316. Bolts stainless steel AISI 316. Material plug: stainless steel AISI 316 Nominal width 7.2 mm, 1.4404, surface: electropolish, single shut off, male thread DIN228/1, 1/2, seal: FPM (Viton)
Nominal Width: 7.2 mm 7.2 Connection:  1/2 1/2 Flow Rate: 1,375 l/min 1,375
SERIES 090.0R
coupling, round, Article: N1450
Nominal width 5.0 mm, material: brass, surface: nickel plated, single shut off, connection type: male thread DIN228/1, connection size: 1/8, seal: NBR (Perbunan) This one-hand coupling with automatic 5-point locking is used where a mixing up of medias has to be ruled out. Achieved this is done through a coding with simultaneous color labelling. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back in the direction of the connection. The valve will return to its starting position and push the plug out of the coupling. Material Coupling: back part, coupler body brass nickel plated. Valve brass. Sleeve aluminium anodised. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: brass nickel plated with anotised aluminium ring. Nominal width 5.0 mm, brass, surface: nickel plated, single shut off, male thread DIN228/1, 1/8, seal: NBR (Perbunan)
Nominal Width: 5 mm 5 Connection:  1/8 1/8 Flow Rate: 600 l/min 600
SERIES 090.0R
plug, round, Article: NYAX0
Nominal width 5.0 mm, material: brass, surface: nickel plated, single shut off, connection type: male thread DIN228/1, connection size: 1/8, seal: NBR (Perbunan) This one-hand coupling with automatic 5-point locking is used where a mixing up of medias has to be ruled out. Achieved this is done through a coding with simultaneous color labelling. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back in the direction of the connection. The valve will return to its starting position and push the plug out of the coupling. Material Coupling: back part, coupler body brass nickel plated. Valve brass. Sleeve aluminium anodised. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: brass nickel plated with anotised aluminium ring. Nominal width 5.0 mm, brass, surface: nickel plated, single shut off, male thread DIN228/1, 1/8, seal: NBR (Perbunan)
Nominal Width: 5 mm 5 Connection:  1/8 1/8 Flow Rate: 600 l/min 600
SERIES 100.00
plug, Article: NMBW2
Nominal width 7.2 mm, material: 1.4404, surface: electropolish, connection type: female thread DIN228/1 (BSP), connection size: 1/4 One-hand coupling with 2-point bolt locking. The uncoupling process is initiated by pushing back the unlocking sleeve into the direction of the connection. The valve moves back to its original position and pushes the plug out of the coupling. Material Coupling: back part, sleeve, coupler body and valve are made of stainless steel AISI 316. Seal FPM (Viton). Spring and circlip stainless steel AISI 316. Bolts stainless steel AISI 316. Material plug: stainless steel AISI 316 Nominal width 7.2 mm, 1.4404, surface: electropolish, female thread DIN228/1 (BSP), 1/4
Nominal Width: 7.2 mm 7.2 Connection:  1/4 1/4 Flow Rate: 1,375 l/min 1,375
SERIES 093.00
coupling, Article: N85W3
Nominal width 4.0 mm, material: 1.4305, surface: electropolish, flat face , connection type: female thread DIN228/1 (BSP), connection size: 1/4, seal: NBR (Perbunan) Material coupling and plug: connections, base body, Sleeve, plug and valves stainless steel AISI 303. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Nominal width 4.0 mm, 1.4305, surface: electropolish, flat face , female thread DIN228/1 (BSP), 1/4, seal: NBR (Perbunan)
Nominal Width: 4 mm 4 Connection:  1/4 1/4 Flow Rate: 14 l/min 14
SERIES 100.00
coupling, Article: N79S0
Nominal width 7.2 mm, material: 1.4404, surface: electropolish, single shut off, connection type: male thread DIN228/1, connection size: 3/8, seal: FPM (Viton) One-hand coupling with 2-point bolt locking. The uncoupling process is initiated by pushing back the unlocking sleeve into the direction of the connection. The valve moves back to its original position and pushes the plug out of the coupling. Material Coupling: back part, sleeve, coupler body and valve are made of stainless steel AISI 316. Seal FPM (Viton). Spring and circlip stainless steel AISI 316. Bolts stainless steel AISI 316. Material plug: stainless steel AISI 316 Nominal width 7.2 mm, 1.4404, surface: electropolish, single shut off, male thread DIN228/1, 3/8, seal: FPM (Viton)
Nominal Width: 7.2 mm 7.2 Connection:  3/8 3/8 Flow Rate: 1,375 l/min 1,375
SERIES 090.0R
coupling, round, Article: N9230
Nominal width 5.0 mm, material: brass, surface: nickel plated, single shut off, connection type: male thread DIN228/1, connection size: 1/4, seal: NBR (Perbunan) This one-hand coupling with automatic 5-point locking is used where a mixing up of medias has to be ruled out. Achieved this is done through a coding with simultaneous color labelling. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back in the direction of the connection. The valve will return to its starting position and push the plug out of the coupling. Material Coupling: back part, coupler body brass nickel plated. Valve brass. Sleeve aluminium anodised. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: brass nickel plated with anotised aluminium ring. Nominal width 5.0 mm, brass, surface: nickel plated, single shut off, male thread DIN228/1, 1/4, seal: NBR (Perbunan)
Nominal Width: 5 mm 5 Connection:  1/4 1/4 Flow Rate: 600 l/min 600
SERIES 100.00
plug, Article: NMB20
Nominal width 7.2 mm, material: 1.4404, surface: electropolish, connection type: hose connection, connection size: LW8 One-hand coupling with 2-point bolt locking. The uncoupling process is initiated by pushing back the unlocking sleeve into the direction of the connection. The valve moves back to its original position and pushes the plug out of the coupling. Material Coupling: back part, sleeve, coupler body and valve are made of stainless steel AISI 316. Seal FPM (Viton). Spring and circlip stainless steel AISI 316. Bolts stainless steel AISI 316. Material plug: stainless steel AISI 316 Nominal width 7.2 mm, 1.4404, surface: electropolish, hose connection, LW8
Nominal Width: 7.2 mm 7.2 Connection: LW8 LW8 Flow Rate: 1,375 l/min 1,375
SERIES 100.00
plug, Article: NMB30
Nominal width 7.2 mm, material: 1.4404, surface: electropolish, connection type: hose connection, connection size: LW9 One-hand coupling with 2-point bolt locking. The uncoupling process is initiated by pushing back the unlocking sleeve into the direction of the connection. The valve moves back to its original position and pushes the plug out of the coupling. Material Coupling: back part, sleeve, coupler body and valve are made of stainless steel AISI 316. Seal FPM (Viton). Spring and circlip stainless steel AISI 316. Bolts stainless steel AISI 316. Material plug: stainless steel AISI 316 Nominal width 7.2 mm, 1.4404, surface: electropolish, hose connection, LW9
Nominal Width: 7.2 mm 7.2 Connection: LW9 LW9 Flow Rate: 1,375 l/min 1,375
SERIES 100.00
plug, Article: NMBJ2
Nominal width 7.2 mm, material: 1.4404, surface: electropolish, connection type: male thread DIN228/1, connection size: 1/4 One-hand coupling with 2-point bolt locking. The uncoupling process is initiated by pushing back the unlocking sleeve into the direction of the connection. The valve moves back to its original position and pushes the plug out of the coupling. Material Coupling: back part, sleeve, coupler body and valve are made of stainless steel AISI 316. Seal FPM (Viton). Spring and circlip stainless steel AISI 316. Bolts stainless steel AISI 316. Material plug: stainless steel AISI 316 Nominal width 7.2 mm, 1.4404, surface: electropolish, male thread DIN228/1, 1/4
Nominal Width: 7.2 mm 7.2 Connection:  1/4 1/4 Flow Rate: 1,375 l/min 1,375
SERIES 100.00
coupling, Article: N85A4
Nominal width 7.2 mm, material: 1.4404, surface: electropolish, single shut off, connection type: hose connection, connection size: LW9, seal: FPM (Viton) One-hand coupling with 2-point bolt locking. The uncoupling process is initiated by pushing back the unlocking sleeve into the direction of the connection. The valve moves back to its original position and pushes the plug out of the coupling. Material Coupling: back part, sleeve, coupler body and valve are made of stainless steel AISI 316. Seal FPM (Viton). Spring and circlip stainless steel AISI 316. Bolts stainless steel AISI 316. Material plug: stainless steel AISI 316 Nominal width 7.2 mm, 1.4404, surface: electropolish, single shut off, hose connection, LW9, seal: FPM (Viton)
Nominal Width: 7.2 mm 7.2 Connection: LW9 LW9 Flow Rate: 1,375 l/min 1,375
SERIES 090.0S
plug, hexagonal, Article: NYKE0
Nominal width 5.0 mm, material: brass, surface: nickel plated, connection type: female thread DIN228/1 (BSP), connection size: 1/4, seal: NBR (Perbunan) This one-hand coupling with automatic 5-point locking is used where a mixing up of medias has to be ruled out. Achieved this is done through a coding with simultaneous color labelling. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back in the direction of the connection. The valve will return to its starting position and push the plug out of the coupling. Material Coupling: back part, coupler body brass nickel plated. Valve brass. Sleeve aluminium anodised. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: brass nickel plated with anotised aluminium ring. Nominal width 5.0 mm, brass, surface: nickel plated, female thread DIN228/1 (BSP), 1/4, seal: NBR (Perbunan)
Nominal Width: 5 mm 5 Connection:  1/4 1/4 Flow Rate: 600 l/min 600
SERIES 090.0S
coupling, hexagonal, Article: N1420
Nominal width 5.0 mm, material: brass, surface: nickel plated, single shut off, connection type: male thread DIN228/1, connection size: 1/8, seal: NBR (Perbunan) This one-hand coupling with automatic 5-point locking is used where a mixing up of medias has to be ruled out. Achieved this is done through a coding with simultaneous color labelling. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back in the direction of the connection. The valve will return to its starting position and push the plug out of the coupling. Material Coupling: back part, coupler body brass nickel plated. Valve brass. Sleeve aluminium anodised. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: brass nickel plated with anotised aluminium ring. Nominal width 5.0 mm, brass, surface: nickel plated, single shut off, male thread DIN228/1, 1/8, seal: NBR (Perbunan)
Nominal Width: 5 mm 5 Connection:  1/8 1/8 Flow Rate: 600 l/min 600
SERIES 090.0D
plug, triangular, Article: NYKC0
Nominal width 5.0 mm, material: brass, surface: nickel plated, single shut off, connection type: female thread DIN228/1 (BSP), connection size: 1/8, seal: NBR (Perbunan) This one-hand coupling with automatic 5-point locking is used where a mixing up of medias has to be ruled out. Achieved this is done through a coding with simultaneous color labelling. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back in the direction of the connection. The valve will return to its starting position and push the plug out of the coupling. Material Coupling: back part, coupler body brass nickel plated. Valve brass. Sleeve aluminium anodised. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: brass nickel plated with anotised aluminium ring. Nominal width 5.0 mm, brass, surface: nickel plated, single shut off, female thread DIN228/1 (BSP), 1/8, seal: NBR (Perbunan)
Nominal Width: 5 mm 5 Connection:  1/8 1/8 Flow Rate: 600 l/min 600
SERIES 090.0D
coupling, triangular, Article: N1440
Nominal width 5.0 mm, material: brass, surface: nickel plated, single shut off, connection type: male thread DIN228/1, connection size: 1/8, seal: NBR (Perbunan) This one-hand coupling with automatic 5-point locking is used where a mixing up of medias has to be ruled out. Achieved this is done through a coding with simultaneous color labelling. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back in the direction of the connection. The valve will return to its starting position and push the plug out of the coupling. Material Coupling: back part, coupler body brass nickel plated. Valve brass. Sleeve aluminium anodised. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: brass nickel plated with anotised aluminium ring. Nominal width 5.0 mm, brass, surface: nickel plated, single shut off, male thread DIN228/1, 1/8, seal: NBR (Perbunan)
Nominal Width: 5 mm 5 Connection:  1/8 1/8 Flow Rate: 600 l/min 600
SERIES 090.0R
plug, round, Article: NYKD0
Nominal width 5.0 mm, material: brass, surface: nickel plated, single shut off, connection type: female thread DIN228/1 (BSP), connection size: 1/4, seal: NBR (Perbunan) This one-hand coupling with automatic 5-point locking is used where a mixing up of medias has to be ruled out. Achieved this is done through a coding with simultaneous color labelling. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back in the direction of the connection. The valve will return to its starting position and push the plug out of the coupling. Material Coupling: back part, coupler body brass nickel plated. Valve brass. Sleeve aluminium anodised. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: brass nickel plated with anotised aluminium ring. Nominal width 5.0 mm, brass, surface: nickel plated, single shut off, female thread DIN228/1 (BSP), 1/4, seal: NBR (Perbunan)
Nominal Width: 5 mm 5 Connection:  1/4 1/4 Flow Rate: 600 l/min 600
SERIES 090.0A
coupling, octagonal, Article: N9210
Nominal width 5.0 mm, material: brass, surface: nickel plated, single shut off, connection type: male thread DIN228/1, connection size: 1/4, seal: NBR (Perbunan) This one-hand coupling with automatic 5-point locking is used where a mixing up of medias has to be ruled out. Achieved this is done through a coding with simultaneous color labelling. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back in the direction of the connection. The valve will return to its starting position and push the plug out of the coupling. Material Coupling: back part, coupler body brass nickel plated. Valve brass. Sleeve aluminium anodised. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: brass nickel plated with anotised aluminium ring. Nominal width 5.0 mm, brass, surface: nickel plated, single shut off, male thread DIN228/1, 1/4, seal: NBR (Perbunan)
Nominal Width: 5 mm 5 Connection:  1/4 1/4 Flow Rate: 600 l/min 600
SERIES 100.00
coupling, Article: N79R0
Nominal width 7.2 mm, material: 1.4404, surface: electropolish, single shut off, connection type: male thread DIN228/1, connection size: 1/4, seal: FPM (Viton) One-hand coupling with 2-point bolt locking. The uncoupling process is initiated by pushing back the unlocking sleeve into the direction of the connection. The valve moves back to its original position and pushes the plug out of the coupling. Material Coupling: back part, sleeve, coupler body and valve are made of stainless steel AISI 316. Seal FPM (Viton). Spring and circlip stainless steel AISI 316. Bolts stainless steel AISI 316. Material plug: stainless steel AISI 316 Nominal width 7.2 mm, 1.4404, surface: electropolish, single shut off, male thread DIN228/1, 1/4, seal: FPM (Viton)
Nominal Width: 7.2 mm 7.2 Connection:  1/4 1/4 Flow Rate: 1,375 l/min 1,375
SERIES 090.0D
plug, triangular, Article: NYKB0
Nominal width 5.0 mm, material: brass, surface: nickel plated, single shut off, connection type: female thread DIN228/1 (BSP), connection size: 1/4, seal: NBR (Perbunan) This one-hand coupling with automatic 5-point locking is used where a mixing up of medias has to be ruled out. Achieved this is done through a coding with simultaneous color labelling. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back in the direction of the connection. The valve will return to its starting position and push the plug out of the coupling. Material Coupling: back part, coupler body brass nickel plated. Valve brass. Sleeve aluminium anodised. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: brass nickel plated with anotised aluminium ring. Nominal width 5.0 mm, brass, surface: nickel plated, single shut off, female thread DIN228/1 (BSP), 1/4, seal: NBR (Perbunan)
Nominal Width: 5 mm 5 Connection:  1/4 1/4 Flow Rate: 600 l/min 600
SERIES 100.00
plug, Article: NMBK2
Nominal width 7.2 mm, material: 1.4404, surface: electropolish, connection type: male thread DIN228/1, connection size: 3/8 One-hand coupling with 2-point bolt locking. The uncoupling process is initiated by pushing back the unlocking sleeve into the direction of the connection. The valve moves back to its original position and pushes the plug out of the coupling. Material Coupling: back part, sleeve, coupler body and valve are made of stainless steel AISI 316. Seal FPM (Viton). Spring and circlip stainless steel AISI 316. Bolts stainless steel AISI 316. Material plug: stainless steel AISI 316 Nominal width 7.2 mm, 1.4404, surface: electropolish, male thread DIN228/1, 3/8
Nominal Width: 7.2 mm 7.2 Connection:  3/8 3/8 Flow Rate: 1,375 l/min 1,375