17 products found.
SERIES 090.0A
coupling,
octagonal,
Article: N9470
Nominal width 5.0 mm, material: brass, surface: nickel plated, single shut off, connection type: male thread DIN228/1, connection size: 1/8, seal: NBR (Perbunan) This one-hand coupling with automatic 5-point locking is used where a mixing up of medias has to be ruled out. Achieved this is done through a coding with simultaneous color labelling. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back in the direction of the connection. The valve will return to its starting position and push the plug out of the coupling. Material Coupling: back part, coupler body brass nickel plated. Valve brass. Sleeve aluminium anodised. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: brass nickel plated with anotised aluminium ring. Nominal width 5.0 mm, brass, surface: nickel plated, single shut off, male thread DIN228/1, 1/8, seal: NBR (Perbunan)
5 |
1/8 |
600 |
SERIES 090.0S
coupling,
hexagonal,
Article: N9460
Nominal width 5.0 mm, material: brass, surface: nickel plated, single shut off, connection type: male thread DIN228/1, connection size: 1/8, seal: NBR (Perbunan) This one-hand coupling with automatic 5-point locking is used where a mixing up of medias has to be ruled out. Achieved this is done through a coding with simultaneous color labelling. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back in the direction of the connection. The valve will return to its starting position and push the plug out of the coupling. Material Coupling: back part, coupler body brass nickel plated. Valve brass. Sleeve aluminium anodised. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: brass nickel plated with anotised aluminium ring. Nominal width 5.0 mm, brass, surface: nickel plated, single shut off, male thread DIN228/1, 1/8, seal: NBR (Perbunan)
|
5 |
1/8 |
600 |
SERIES 050.00
coupling,
Article: N81C0
Nominal width 2.7 mm, material: 1.4305, single shut off, connection type: female thread metric, connection size: M5, seal: FPM (Viton) One-hand coupling with automatic 3-point locking. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back into the direction of the connection. The valve will return to its starting position and pushes the plug out of the coupling. Material coupling and plug: back part, sleeve, coupler body, valve and plug stainless steel AISI 303. Seal FPM (Viton). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 316. Material plug: stainless steel AISI 303 Nominal width 2.7 mm, 1.4305, single shut off, female thread metric, M5, seal: FPM (Viton)
|
2.7 |
M5 |
120 |
SERIES 050.00
plug,
Article: NMAG5
Nominal width 2.7 mm, material: 1.4305, connection type: male thread DIN228/1, connection size: 1/8 One-hand coupling with automatic 3-point locking. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back into the direction of the connection. The valve will return to its starting position and pushes the plug out of the coupling. Material coupling and plug: back part, sleeve, coupler body, valve and plug stainless steel AISI 303. Seal FPM (Viton). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 316. Material plug: stainless steel AISI 303 Nominal width 2.7 mm, 1.4305, male thread DIN228/1, 1/8
|
2.7 |
1/8 |
120 |
SERIES 050.00
plug,
Article: NMAA5
Nominal width 2.7 mm, material: 1.4305, connection type: hose connection, connection size: LW3 One-hand coupling with automatic 3-point locking. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back into the direction of the connection. The valve will return to its starting position and pushes the plug out of the coupling. Material coupling and plug: back part, sleeve, coupler body, valve and plug stainless steel AISI 303. Seal FPM (Viton). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 316. Material plug: stainless steel AISI 303 Nominal width 2.7 mm, 1.4305, hose connection, LW3
|
2.7 |
LW3 |
120 |
SERIES 050.00
plug,
Article: NMGX5
Nominal width 2.7 mm, material: 1.4305, connection type: female thread metric, connection size: M5 One-hand coupling with automatic 3-point locking. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back into the direction of the connection. The valve will return to its starting position and pushes the plug out of the coupling. Material coupling and plug: back part, sleeve, coupler body, valve and plug stainless steel AISI 303. Seal FPM (Viton). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 316. Material plug: stainless steel AISI 303 Nominal width 2.7 mm, 1.4305, female thread metric, M5
|
2.7 |
M5 |
120 |
SERIES 050.00
plug,
Article: NMG15
Nominal width 2.7 mm, material: 1.4305, connection type: hose connection, connection size: LW5 One-hand coupling with automatic 3-point locking. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back into the direction of the connection. The valve will return to its starting position and pushes the plug out of the coupling. Material coupling and plug: back part, sleeve, coupler body, valve and plug stainless steel AISI 303. Seal FPM (Viton). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 316. Material plug: stainless steel AISI 303 Nominal width 2.7 mm, 1.4305, hose connection, LW5
|
2.7 |
LW5 |
120 |
SERIES 050.00
coupling,
Article: N81F2
Nominal width 2.7 mm, material: 1.4305, single shut off, connection type: quick fit connection, connection size: 4x6, seal: FPM (Viton) One-hand coupling with automatic 3-point locking. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back into the direction of the connection. The valve will return to its starting position and pushes the plug out of the coupling. Material coupling and plug: back part, sleeve, coupler body, valve and plug stainless steel AISI 303. Seal FPM (Viton). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 316. Material plug: stainless steel AISI 303 Nominal width 2.7 mm, 1.4305, single shut off, quick fit connection, 4x6, seal: FPM (Viton)
|
2.7 |
4x6 |
120 |
SERIES 050.00
plug,
Article: NYBP3
Nominal width 2.7 mm, material: 1.4305, connection type: quick fit connection, connection size: 3x4 One-hand coupling with automatic 3-point locking. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back into the direction of the connection. The valve will return to its starting position and pushes the plug out of the coupling. Material coupling and plug: back part, sleeve, coupler body, valve and plug stainless steel AISI 303. Seal FPM (Viton). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 316. Material plug: stainless steel AISI 303 Nominal width 2.7 mm, 1.4305, quick fit connection, 3x4
|
2.7 |
3x4 |
120 |
SERIES 050.00
plug,
Article: NMAB5
Nominal width 2.7 mm, material: 1.4305, connection type: hose connection, connection size: LW4 One-hand coupling with automatic 3-point locking. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back into the direction of the connection. The valve will return to its starting position and pushes the plug out of the coupling. Material coupling and plug: back part, sleeve, coupler body, valve and plug stainless steel AISI 303. Seal FPM (Viton). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 316. Material plug: stainless steel AISI 303 Nominal width 2.7 mm, 1.4305, hose connection, LW4
|
2.7 |
LW4 |
120 |
SERIES 050.00
plug,
Article: NYBQ3
Nominal width 2.7 mm, material: 1.4305, connection type: quick fit connection, connection size: 3x5 One-hand coupling with automatic 3-point locking. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back into the direction of the connection. The valve will return to its starting position and pushes the plug out of the coupling. Material coupling and plug: back part, sleeve, coupler body, valve and plug stainless steel AISI 303. Seal FPM (Viton). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 316. Material plug: stainless steel AISI 303 Nominal width 2.7 mm, 1.4305, quick fit connection, 3x5
|
2.7 |
3x5 |
120 |
SERIES 050.00
plug,
Article: NYBR3
Nominal width 2.7 mm, material: 1.4305, connection type: quick fit connection, connection size: 4x6 One-hand coupling with automatic 3-point locking. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back into the direction of the connection. The valve will return to its starting position and pushes the plug out of the coupling. Material coupling and plug: back part, sleeve, coupler body, valve and plug stainless steel AISI 303. Seal FPM (Viton). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 316. Material plug: stainless steel AISI 303 Nominal width 2.7 mm, 1.4305, quick fit connection, 4x6
|
2.7 |
4x6 |
120 |
SERIES 050.00
coupling,
Article: N81E1
Nominal width 2.7 mm, material: 1.4305, single shut off, connection type: hose connection, connection size: LW4, seal: FPM (Viton) One-hand coupling with automatic 3-point locking. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back into the direction of the connection. The valve will return to its starting position and pushes the plug out of the coupling. Material coupling and plug: back part, sleeve, coupler body, valve and plug stainless steel AISI 303. Seal FPM (Viton). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 316. Material plug: stainless steel AISI 303 Nominal width 2.7 mm, 1.4305, single shut off, hose connection, LW4, seal: FPM (Viton)
|
2.7 |
LW4 |
120 |
SERIES 090.0R
coupling,
round,
Article: N9230
Nominal width 5.0 mm, material: brass, surface: nickel plated, single shut off, connection type: male thread DIN228/1, connection size: 1/4, seal: NBR (Perbunan) This one-hand coupling with automatic 5-point locking is used where a mixing up of medias has to be ruled out. Achieved this is done through a coding with simultaneous color labelling. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back in the direction of the connection. The valve will return to its starting position and push the plug out of the coupling. Material Coupling: back part, coupler body brass nickel plated. Valve brass. Sleeve aluminium anodised. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: brass nickel plated with anotised aluminium ring. Nominal width 5.0 mm, brass, surface: nickel plated, single shut off, male thread DIN228/1, 1/4, seal: NBR (Perbunan)
|
5 |
1/4 |
600 |
SERIES 050.00
coupling,
Article: N81F0
Nominal width 2.7 mm, material: 1.4305, single shut off, connection type: quick fit connection, connection size: 3x4, seal: FPM (Viton) One-hand coupling with automatic 3-point locking. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back into the direction of the connection. The valve will return to its starting position and pushes the plug out of the coupling. Material coupling and plug: back part, sleeve, coupler body, valve and plug stainless steel AISI 303. Seal FPM (Viton). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 316. Material plug: stainless steel AISI 303 Nominal width 2.7 mm, 1.4305, single shut off, quick fit connection, 3x4, seal: FPM (Viton)
|
2.7 |
3x4 |
120 |
SERIES 090.0D
coupling,
triangular,
Article: N9220
Nominal width 5.0 mm, material: brass, surface: nickel plated, single shut off, connection type: male thread DIN228/1, connection size: 1/4, seal: NBR (Perbunan) This one-hand coupling with automatic 5-point locking is used where a mixing up of medias has to be ruled out. Achieved this is done through a coding with simultaneous color labelling. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back in the direction of the connection. The valve will return to its starting position and push the plug out of the coupling. Material Coupling: back part, coupler body brass nickel plated. Valve brass. Sleeve aluminium anodised. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: brass nickel plated with anotised aluminium ring. Nominal width 5.0 mm, brass, surface: nickel plated, single shut off, male thread DIN228/1, 1/4, seal: NBR (Perbunan)
|
5 |
1/4 |
600 |
SERIES 050.00
coupling,
Article: N81F1
Nominal width 2.7 mm, material: 1.4305, single shut off, connection type: quick fit connection, connection size: 3x5, seal: FPM (Viton) One-hand coupling with automatic 3-point locking. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back into the direction of the connection. The valve will return to its starting position and pushes the plug out of the coupling. Material coupling and plug: back part, sleeve, coupler body, valve and plug stainless steel AISI 303. Seal FPM (Viton). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 316. Material plug: stainless steel AISI 303 Nominal width 2.7 mm, 1.4305, single shut off, quick fit connection, 3x5, seal: FPM (Viton)
|
2.7 |
3x5 |
120 |