STEINCONNECTOR product search

€0.00*
Categories
Filter
77 products found.
SERIES 120.00
coupling, Article: N1LH0
Image similar to the original Article: N1LH0, Nominal Width|5.5 mm, Connection| 1/4, Flow Rate|680 l/min
Nominal width 5.5 mm, material: brass, single shut off, connection type: female thread DIN228/1 (BSP), connection size: 1/4, seal: NBR (Perbunan) One-hand coupling with 2-point bolt locking. The uncoupling process is initiated by pushing back the unlocking sleeve into the direction of the connection. The valve moves back to its original position and pushes the plug out of the coupling. Material Coupling: back part, sleeve, coupler body and valve brass. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Bolts stainless steel AISI 420. Material plug: brass Nominal width 5.5 mm, brass, single shut off, female thread DIN228/1 (BSP), 1/4, seal: NBR (Perbunan)Steinconnector 123, Industr. Interchange 1/4″, US-MIL-SPEC-C-4109, ISO 6150 B, Rectus 23 + 24, Rectus 1400/1423, Tema 1400, Cejn 310, Hansen 3000, Faster, Gromelle 600, Parker 20 1/4″ + 30 1/4″, JWL 521 + JWL 531
Nominal Width: 5.5 mm 5.5 Connection: 1/4 1/4 Flow Rate: 680 l/min 680
more Details
SERIES 120.00
coupling, Article: N1K80
Image similar to the original Article: N1K80, Nominal Width|5.5 mm, Connection| 1/2, Flow Rate|680 l/min
Nominal width 5.5 mm, material: brass, single shut off, connection type: male thread DIN228/1, connection size: 1/2, seal: NBR (Perbunan) One-hand coupling with 2-point bolt locking. The uncoupling process is initiated by pushing back the unlocking sleeve into the direction of the connection. The valve moves back to its original position and pushes the plug out of the coupling. Material Coupling: back part, sleeve, coupler body and valve brass. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Bolts stainless steel AISI 420. Material plug: brass Nominal width 5.5 mm, brass, single shut off, male thread DIN228/1, 1/2, seal: NBR (Perbunan)Steinconnector 123, Industr. Interchange 1/4″, US-MIL-SPEC-C-4109, ISO 6150 B, Rectus 23 + 24, Rectus 1400/1423, Tema 1400, Cejn 310, Hansen 3000, Faster, Gromelle 600, Parker 20 1/4″ + 30 1/4″, JWL 521 + JWL 531
Nominal Width: 5.5 mm 5.5 Connection: 1/2 1/2 Flow Rate: 680 l/min 680
more Details
SERIES 120.00
coupling, Article: N1LV0
Image similar to the original Article: N1LV0, Nominal Width|5.5 mm, Connection|LW8, Flow Rate|680 l/min
Nominal width 5.5 mm, material: brass, single shut off, connection type: hose connection, connection size: LW8, seal: NBR (Perbunan) One-hand coupling with 2-point bolt locking. The uncoupling process is initiated by pushing back the unlocking sleeve into the direction of the connection. The valve moves back to its original position and pushes the plug out of the coupling. Material Coupling: back part, sleeve, coupler body and valve brass. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Bolts stainless steel AISI 420. Material plug: brass Nominal width 5.5 mm, brass, single shut off, hose connection, LW8, seal: NBR (Perbunan)Steinconnector 123, Industr. Interchange 1/4″, US-MIL-SPEC-C-4109, ISO 6150 B, Rectus 23 + 24, Rectus 1400/1423, Tema 1400, Cejn 310, Hansen 3000, Faster, Gromelle 600, Parker 20 1/4″ + 30 1/4″, JWL 521 + JWL 531
Nominal Width: 5.5 mm 5.5 Connection: LW8 LW8 Flow Rate: 680 l/min 680
more Details
SERIES 123.00
plug, Article: OMGB0
Image similar to the original Article: OMGB0, Nominal Width|5.5 mm, Connection| 1/4, Flow Rate|1,780 l/min
Nominal width 5.5 mm, material: steel, surface: zinc-plated, connection type: male thread DIN2999 (BSPT), connection size: 1/4 One-hand coupling with automatic 5-point locking. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back into the direction of the connection. The valve will return to its starting position and pushes the plug out of the coupling. Material coupling: back part and body are made of brass nickel plated. Valve brass. Sleeve steel hardend nickel plated. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: steel hardend zink plated. Nominal width 5.5 mm, steel, surface: zinc-plated, male thread DIN2999 (BSPT), 1/4Steinconnector 120, Industr. Interchange 1/4″, US-MIL-SPEC-C-4109, ISO 6150 B, Rectus 23 + 24, Rectus 1400/1423, Tema 1400, Cejn 310, Hansen 3000, Faster, Gromelle 600, Parker 20 1/4″ + 30 1/4″, JWL 521 + JWL 531
Nominal Width: 5.5 mm 5.5 Connection: 1/4 1/4 Flow Rate: 1,780 l/min 1,780
more Details
SERIES 122.V0
coupling, protected by twisting the locking nut, Article: N2VS1
Image similar to the original Article: N2VS1, Nominal Width|5.5 mm, Connection| 1/4, Flow Rate|2,030 l/min
Nominal width 5.5 mm, material: brass, surface: nickel plated, connection type: female thread DIN228/1 (BSP), connection size: 1/4, seal: NBR (Perbunan) One-hand coupling with automatic 5-point locking. Locking elements are balls which are locked by a spring-loaded unlocking sleeve. Disconnect by pushing the release sleeve back into the direction of the connection. The valve moves back to its original position and closes the coupling. All couplings in this series have an additional lock nut to secure the coupling against accidental uncoupling. Material coupling: back part and body are made of brass nickel plated. Valve brass. Sleeve steel hardend nickel plated. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: steel hardend zink plated. Nominal width 5.5 mm, brass, surface: nickel plated, female thread DIN228/1 (BSP), 1/4, seal: NBR (Perbunan)Steinconnector 110, Rectus 14 + 22, ARO 210, Parker 50, CEJN 300, ORION 44510, JWL 552 + JWL 532, div. Schweizer Fabrikate
Nominal Width: 5.5 mm 5.5 Connection: 1/4 1/4 Flow Rate: 2,030 l/min 2,030
more Details
SERIES 120.00
coupling, Article: N1LX0
Image similar to the original Article: N1LX0, Nominal Width|5.5 mm, Connection|LW10, Flow Rate|680 l/min
Nominal width 5.5 mm, material: brass, single shut off, connection type: hose connection, connection size: LW10, seal: NBR (Perbunan) One-hand coupling with 2-point bolt locking. The uncoupling process is initiated by pushing back the unlocking sleeve into the direction of the connection. The valve moves back to its original position and pushes the plug out of the coupling. Material Coupling: back part, sleeve, coupler body and valve brass. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Bolts stainless steel AISI 420. Material plug: brass Nominal width 5.5 mm, brass, single shut off, hose connection, LW10, seal: NBR (Perbunan)Steinconnector 123, Industr. Interchange 1/4″, US-MIL-SPEC-C-4109, ISO 6150 B, Rectus 23 + 24, Rectus 1400/1423, Tema 1400, Cejn 310, Hansen 3000, Faster, Gromelle 600, Parker 20 1/4″ + 30 1/4″, JWL 521 + JWL 531
Nominal Width: 5.5 mm 5.5 Connection: LW10 LW10 Flow Rate: 680 l/min 680
more Details
SERIES 120.00
coupling, Article: N1K60
Image similar to the original Article: N1K60, Nominal Width|5.5 mm, Connection| 1/4, Flow Rate|680 l/min
Nominal width 5.5 mm, material: brass, single shut off, connection type: male thread DIN228/1, connection size: 1/4, seal: NBR (Perbunan) One-hand coupling with 2-point bolt locking. The uncoupling process is initiated by pushing back the unlocking sleeve into the direction of the connection. The valve moves back to its original position and pushes the plug out of the coupling. Material Coupling: back part, sleeve, coupler body and valve brass. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Bolts stainless steel AISI 420. Material plug: brass Nominal width 5.5 mm, brass, single shut off, male thread DIN228/1, 1/4, seal: NBR (Perbunan)Steinconnector 123, Industr. Interchange 1/4″, US-MIL-SPEC-C-4109, ISO 6150 B, Rectus 23 + 24, Rectus 1400/1423, Tema 1400, Cejn 310, Hansen 3000, Faster, Gromelle 600, Parker 20 1/4″ + 30 1/4″, JWL 521 + JWL 531
Nominal Width: 5.5 mm 5.5 Connection: 1/4 1/4 Flow Rate: 680 l/min 680
more Details
SERIES 120.00
coupling, Article: N1K70
Image similar to the original Article: N1K70, Nominal Width|5.5 mm, Connection| 3/8, Flow Rate|680 l/min
Nominal width 5.5 mm, material: brass, single shut off, connection type: male thread DIN228/1, connection size: 3/8, seal: NBR (Perbunan) One-hand coupling with 2-point bolt locking. The uncoupling process is initiated by pushing back the unlocking sleeve into the direction of the connection. The valve moves back to its original position and pushes the plug out of the coupling. Material Coupling: back part, sleeve, coupler body and valve brass. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Bolts stainless steel AISI 420. Material plug: brass Nominal width 5.5 mm, brass, single shut off, male thread DIN228/1, 3/8, seal: NBR (Perbunan)Steinconnector 123, Industr. Interchange 1/4″, US-MIL-SPEC-C-4109, ISO 6150 B, Rectus 23 + 24, Rectus 1400/1423, Tema 1400, Cejn 310, Hansen 3000, Faster, Gromelle 600, Parker 20 1/4″ + 30 1/4″, JWL 521 + JWL 531
Nominal Width: 5.5 mm 5.5 Connection: 3/8 3/8 Flow Rate: 680 l/min 680
more Details
SERIES 123.00
plug, Article: OMGP0
Image similar to the original Article: OMGP0, Nominal Width|5.5 mm, Connection| 1/4, Flow Rate|1,780 l/min
Nominal width 5.5 mm, material: steel, surface: zinc-plated, connection type: female thread DIN228/1 (BSP), connection size: 1/4 One-hand coupling with automatic 5-point locking. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back into the direction of the connection. The valve will return to its starting position and pushes the plug out of the coupling. Material coupling: back part and body are made of brass nickel plated. Valve brass. Sleeve steel hardend nickel plated. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: steel hardend zink plated. Nominal width 5.5 mm, steel, surface: zinc-plated, female thread DIN228/1 (BSP), 1/4Steinconnector 120, Industr. Interchange 1/4″, US-MIL-SPEC-C-4109, ISO 6150 B, Rectus 23 + 24, Rectus 1400/1423, Tema 1400, Cejn 310, Hansen 3000, Faster, Gromelle 600, Parker 20 1/4″ + 30 1/4″, JWL 521 + JWL 531
Nominal Width: 5.5 mm 5.5 Connection: 1/4 1/4 Flow Rate: 1,780 l/min 1,780
more Details
SERIES 123.00
coupling, Article: N11Z0
Image similar to the original Article: N11Z0, Nominal Width|5.5 mm, Connection| 1/4, Flow Rate|1,780 l/min
Nominal width 5.5 mm, material: brass, surface: nickel plated, single shut off, connection type: female thread DIN228/1 (BSP), connection size: 1/4, seal: NBR (Perbunan) One-hand coupling with automatic 5-point locking. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back into the direction of the connection. The valve will return to its starting position and pushes the plug out of the coupling. Material coupling: back part and body are made of brass nickel plated. Valve brass. Sleeve steel hardend nickel plated. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: steel hardend zink plated. Nominal width 5.5 mm, brass, surface: nickel plated, single shut off, female thread DIN228/1 (BSP), 1/4, seal: NBR (Perbunan)Steinconnector 120, Industr. Interchange 1/4″, US-MIL-SPEC-C-4109, ISO 6150 B, Rectus 23 + 24, Rectus 1400/1423, Tema 1400, Cejn 310, Hansen 3000, Faster, Gromelle 600, Parker 20 1/4″ + 30 1/4″, JWL 521 + JWL 531
Nominal Width: 5.5 mm 5.5 Connection: 1/4 1/4 Flow Rate: 1,780 l/min 1,780
more Details
SERIES 120.00
coupling, Article: N1LJ0
Image similar to the original Article: N1LJ0, Nominal Width|5.5 mm, Connection| 3/8, Flow Rate|680 l/min
Nominal width 5.5 mm, material: brass, single shut off, connection type: female thread DIN228/1 (BSP), connection size: 3/8, seal: NBR (Perbunan) One-hand coupling with 2-point bolt locking. The uncoupling process is initiated by pushing back the unlocking sleeve into the direction of the connection. The valve moves back to its original position and pushes the plug out of the coupling. Material Coupling: back part, sleeve, coupler body and valve brass. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Bolts stainless steel AISI 420. Material plug: brass Nominal width 5.5 mm, brass, single shut off, female thread DIN228/1 (BSP), 3/8, seal: NBR (Perbunan)Steinconnector 123, Industr. Interchange 1/4″, US-MIL-SPEC-C-4109, ISO 6150 B, Rectus 23 + 24, Rectus 1400/1423, Tema 1400, Cejn 310, Hansen 3000, Faster, Gromelle 600, Parker 20 1/4″ + 30 1/4″, JWL 521 + JWL 531
Nominal Width: 5.5 mm 5.5 Connection: 3/8 3/8 Flow Rate: 680 l/min 680
more Details
SERIES 122.V0
coupling, protected by twisting the locking nut, Article: N2VS0
Image similar to the original Article: N2VS0, Nominal Width|5.5 mm, Connection| 1/4, Flow Rate|2,030 l/min
Nominal width 5.5 mm, material: brass, surface: nickel plated, single shut off, connection type: female thread DIN228/1 (BSP), connection size: 1/4, seal: NBR (Perbunan) One-hand coupling with automatic 5-point locking. Locking elements are balls which are locked by a spring-loaded unlocking sleeve. Disconnect by pushing the release sleeve back into the direction of the connection. The valve moves back to its original position and closes the coupling. All couplings in this series have an additional lock nut to secure the coupling against accidental uncoupling. Material coupling: back part and body are made of brass nickel plated. Valve brass. Sleeve steel hardend nickel plated. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: steel hardend zink plated. Nominal width 5.5 mm, brass, surface: nickel plated, single shut off, female thread DIN228/1 (BSP), 1/4, seal: NBR (Perbunan)Steinconnector 110, Rectus 14 + 22, ARO 210, Parker 50, CEJN 300, ORION 44510, JWL 552 + JWL 532, div. Schweizer Fabrikate
Nominal Width: 5.5 mm 5.5 Connection: 1/4 1/4 Flow Rate: 2,030 l/min 2,030
more Details
SERIES 110.C0
coupling, self venting coupling, Article: N7750
Image similar to the original Article: N7750, Nominal Width|5.5 mm, Connection| 1/4, Flow Rate|680 l/min
Nominal width 5.5 mm, material: brass, surface: nickel plated, single shut off, connection type: female thread DIN228/1 (BSP), connection size: 1/4, seal: NBR (Perbunan) Safety bleed valve meets DIN EN ISO 4414 requirements for pneumatic systems. The coupling has an ergonomic grippy slide valve with three functions: 1. Automatic locking of the plug. 2. Switch to the venting state. 3. Unlock the coupling from the vented state. * in points 1 and 2, the movement sequences are carried out under operating pressure. To connect plug and coupling, the plug has to be pressed into the locked state against the pressurized valve. To release the pressurized connection, the release sleeve has to be phushed into direction of the coupling. The plug moves automaticly from the locked into the vented state and the compressed air still present on the plug side can be vented through the coupling. Only now can the plug be safely removed by pulling back the release sleeve. Material coupling: back part, sleeve, coupler body brass nickel plated. Valve brass. Support washer and sleeve-cover plastic. Seal NBR (Buna N) spring and circlip stainless steel AISI 301. Bolts and balls stainless steel AISI 420. Material plug: steel hardend zink plated Nominal width 5.5 mm, brass, surface: nickel plated, single shut off, female thread DIN228/1 (BSP), 1/4, seal: NBR (Perbunan)
Nominal Width: 5.5 mm 5.5 Connection: 1/4 1/4 Flow Rate: 680 l/min 680
more Details
SERIES 122.V0
coupling, protected by twisting the locking nut, Article: N2VT0
Image similar to the original Article: N2VT0, Nominal Width|5.5 mm, Connection| 1/4, Flow Rate|2,030 l/min
Nominal width 5.5 mm, material: brass, surface: nickel plated, single shut off, connection type: male thread DIN2999 (BSPT), connection size: 1/4, seal: NBR (Perbunan) One-hand coupling with automatic 5-point locking. Locking elements are balls which are locked by a spring-loaded unlocking sleeve. Disconnect by pushing the release sleeve back into the direction of the connection. The valve moves back to its original position and closes the coupling. All couplings in this series have an additional lock nut to secure the coupling against accidental uncoupling. Material coupling: back part and body are made of brass nickel plated. Valve brass. Sleeve steel hardend nickel plated. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: steel hardend zink plated. Nominal width 5.5 mm, brass, surface: nickel plated, single shut off, male thread DIN2999 (BSPT), 1/4, seal: NBR (Perbunan)Steinconnector 110, Rectus 14 + 22, ARO 210, Parker 50, CEJN 300, ORION 44510, JWL 552 + JWL 532, div. Schweizer Fabrikate
Nominal Width: 5.5 mm 5.5 Connection: 1/4 1/4 Flow Rate: 2,030 l/min 2,030
more Details
SERIES 123.00
coupling, Article: N11T0
Image similar to the original Article: N11T0, Nominal Width|5.5 mm, Connection| 1/4, Flow Rate|1,780 l/min
Nominal width 5.5 mm, material: brass, surface: nickel plated, single shut off, connection type: male thread DIN2999 (BSPT), connection size: 1/4, seal: NBR (Perbunan) One-hand coupling with automatic 5-point locking. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back into the direction of the connection. The valve will return to its starting position and pushes the plug out of the coupling. Material coupling: back part and body are made of brass nickel plated. Valve brass. Sleeve steel hardend nickel plated. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: steel hardend zink plated. Nominal width 5.5 mm, brass, surface: nickel plated, single shut off, male thread DIN2999 (BSPT), 1/4, seal: NBR (Perbunan)Steinconnector 120, Industr. Interchange 1/4″, US-MIL-SPEC-C-4109, ISO 6150 B, Rectus 23 + 24, Rectus 1400/1423, Tema 1400, Cejn 310, Hansen 3000, Faster, Gromelle 600, Parker 20 1/4″ + 30 1/4″, JWL 521 + JWL 531
Nominal Width: 5.5 mm 5.5 Connection: 1/4 1/4 Flow Rate: 1,780 l/min 1,780
more Details
SERIES 120.00
coupling, Article: N1LY0
Image similar to the original Article: N1LY0, Nominal Width|5.5 mm, Connection|LW13, Flow Rate|680 l/min
Nominal width 5.5 mm, material: brass, single shut off, connection type: hose connection, connection size: LW13, seal: NBR (Perbunan) One-hand coupling with 2-point bolt locking. The uncoupling process is initiated by pushing back the unlocking sleeve into the direction of the connection. The valve moves back to its original position and pushes the plug out of the coupling. Material Coupling: back part, sleeve, coupler body and valve brass. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Bolts stainless steel AISI 420. Material plug: brass Nominal width 5.5 mm, brass, single shut off, hose connection, LW13, seal: NBR (Perbunan)Steinconnector 123, Industr. Interchange 1/4″, US-MIL-SPEC-C-4109, ISO 6150 B, Rectus 23 + 24, Rectus 1400/1423, Tema 1400, Cejn 310, Hansen 3000, Faster, Gromelle 600, Parker 20 1/4″ + 30 1/4″, JWL 521 + JWL 531
Nominal Width: 5.5 mm 5.5 Connection: LW13 LW13 Flow Rate: 680 l/min 680
more Details
SERIES 120.00
plug, Article: OMA60
Image similar to the original Article: OMA60, Nominal Width|5.5 mm, Connection|LW13, Flow Rate|680 l/min
Nominal width 5.5 mm, material: brass, connection type: hose connection, connection size: LW13, seal: NBR (Perbunan) One-hand coupling with 2-point bolt locking. The uncoupling process is initiated by pushing back the unlocking sleeve into the direction of the connection. The valve moves back to its original position and pushes the plug out of the coupling. Material Coupling: back part, sleeve, coupler body and valve brass. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Bolts stainless steel AISI 420. Material plug: brass Nominal width 5.5 mm, brass, hose connection, LW13, seal: NBR (Perbunan)Steinconnector 123, Industr. Interchange 1/4″, US-MIL-SPEC-C-4109, ISO 6150 B, Rectus 23 + 24, Rectus 1400/1423, Tema 1400, Cejn 310, Hansen 3000, Faster, Gromelle 600, Parker 20 1/4″ + 30 1/4″, JWL 521 + JWL 531
Nominal Width: 5.5 mm 5.5 Connection: LW13 LW13 Flow Rate: 680 l/min 680
more Details
SERIES 122.00
plug, Article: OMEG0
Image similar to the original Article: OMEG0, Nominal Width|5.5 mm, Connection| 1/4, Flow Rate|1,780 l/min
Nominal width 5.5 mm, material: steel, surface: zinc-plated, connection type: male thread DIN2999 (BSPT), connection size: 1/4 One-hand coupling with automatic 5-point locking. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back into the direction of the connection. The valve will return to its starting position and pushes the plug out of the coupling. Material coupling: back part and body are made of brass nickel plated. Valve brass. Sleeve steel hardend nickel plated. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: steel hardend zink plated. Nominal width 5.5 mm, steel, surface: zinc-plated, male thread DIN2999 (BSPT), 1/4Steinconnector 110, Rectus 14 + 22, ARO 210, Parker 50, CEJN 300, ORION 44510, JWL 552 + JWL 532, div. Schweizer Fabrikate
Nominal Width: 5.5 mm 5.5 Connection: 1/4 1/4 Flow Rate: 1,780 l/min 1,780
more Details
SERIES 120.C0
coupling, self venting coupling, Article: N78X0
Image similar to the original Article: N78X0, Nominal Width|5.5 mm, Connection|LW6, Flow Rate|680 l/min
Nominal width 5.5 mm, material: brass, surface: nickel plated, single shut off, connection type: hose connection, connection size: LW6, seal: NBR (Perbunan) Safety bleed valve meets DIN EN ISO 4414 requirements for pneumatic systems. The coupling has an ergonomic grippy slide valve with three functions: 1. Automatic locking of the plug. 2. Switch to the venting state. 3. Unlock the coupling from the vented state. * in points 1 and 2, the movement sequences are carried out under operating pressure. To connect plug and coupling, the plug has to be pressed into the locked state against the pressurized valve. To release the pressurized connection, the release sleeve has to be phushed into direction of the coupling. The plug moves automaticly from the locked into the vented state and the compressed air still present on the plug side can be vented through the coupling. Only now can the plug be safely removed by pulling back the release sleeve. Material coupling: back part, sleeve, coupler body brass nickel plated. Valve brass. Support washer and sleeve-cover plastic. Seal NBR (Buna N) spring and circlip stainless steel AISI 301. Bolts and balls stainless steel AISI 420. Material plug: steel hardend zink plated Nominal width 5.5 mm, brass, surface: nickel plated, single shut off, hose connection, LW6, seal: NBR (Perbunan)
Nominal Width: 5.5 mm 5.5 Connection: LW6 LW6 Flow Rate: 680 l/min 680
more Details
SERIES 120.C0
coupling, self venting coupling, Article: N78Y0
Image similar to the original Article: N78Y0, Nominal Width|5.5 mm, Connection|LW8, Flow Rate|680 l/min
Nominal width 5.5 mm, material: brass, surface: nickel plated, single shut off, connection type: hose connection, connection size: LW8, seal: NBR (Perbunan) Safety bleed valve meets DIN EN ISO 4414 requirements for pneumatic systems. The coupling has an ergonomic grippy slide valve with three functions: 1. Automatic locking of the plug. 2. Switch to the venting state. 3. Unlock the coupling from the vented state. * in points 1 and 2, the movement sequences are carried out under operating pressure. To connect plug and coupling, the plug has to be pressed into the locked state against the pressurized valve. To release the pressurized connection, the release sleeve has to be phushed into direction of the coupling. The plug moves automaticly from the locked into the vented state and the compressed air still present on the plug side can be vented through the coupling. Only now can the plug be safely removed by pulling back the release sleeve. Material coupling: back part, sleeve, coupler body brass nickel plated. Valve brass. Support washer and sleeve-cover plastic. Seal NBR (Buna N) spring and circlip stainless steel AISI 301. Bolts and balls stainless steel AISI 420. Material plug: steel hardend zink plated Nominal width 5.5 mm, brass, surface: nickel plated, single shut off, hose connection, LW8, seal: NBR (Perbunan)
Nominal Width: 5.5 mm 5.5 Connection: LW8 LW8 Flow Rate: 680 l/min 680
more Details
SERIES 123.00
coupling, Article: N1160
Image similar to the original Article: N1160, Nominal Width|5.5 mm, Connection|LW8, Flow Rate|1,780 l/min
Nominal width 5.5 mm, material: brass, surface: nickel plated, single shut off, connection type: hose connection, connection size: LW8, seal: NBR (Perbunan) One-hand coupling with automatic 5-point locking. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back into the direction of the connection. The valve will return to its starting position and pushes the plug out of the coupling. Material coupling: back part and body are made of brass nickel plated. Valve brass. Sleeve steel hardend nickel plated. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: steel hardend zink plated. Nominal width 5.5 mm, brass, surface: nickel plated, single shut off, hose connection, LW8, seal: NBR (Perbunan)Steinconnector 120, Industr. Interchange 1/4″, US-MIL-SPEC-C-4109, ISO 6150 B, Rectus 23 + 24, Rectus 1400/1423, Tema 1400, Cejn 310, Hansen 3000, Faster, Gromelle 600, Parker 20 1/4″ + 30 1/4″, JWL 521 + JWL 531
Nominal Width: 5.5 mm 5.5 Connection: LW8 LW8 Flow Rate: 1,780 l/min 1,780
more Details
SERIES 120.00
plug, Article: OMAB0
Image similar to the original Article: OMAB0, Nominal Width|5.5 mm, Connection| 1/4, Flow Rate|2,030 l/min
Nominal width 5.5 mm, material: brass, connection type: male thread DIN228/1, connection size: 1/4 One-hand coupling with 2-point bolt locking. The uncoupling process is initiated by pushing back the unlocking sleeve into the direction of the connection. The valve moves back to its original position and pushes the plug out of the coupling. Material Coupling: back part, sleeve, coupler body and valve brass. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Bolts stainless steel AISI 420. Material plug: brass Nominal width 5.5 mm, brass, male thread DIN228/1, 1/4Steinconnector 123, Industr. Interchange 1/4″, US-MIL-SPEC-C-4109, ISO 6150 B, Rectus 23 + 24, Rectus 1400/1423, Tema 1400, Cejn 310, Hansen 3000, Faster, Gromelle 600, Parker 20 1/4″ + 30 1/4″, JWL 521 + JWL 531
Nominal Width: 5.5 mm 5.5 Connection: 1/4 1/4 Flow Rate: 2,030 l/min 2,030
more Details
SERIES 110.C0
coupling, self venting coupling, Article: N7760
Image similar to the original Article: N7760, Nominal Width|5.5 mm, Connection| 1/2, Flow Rate|680 l/min
Nominal width 5.5 mm, material: brass, surface: nickel plated, single shut off, connection type: female thread DIN228/1 (BSP), connection size: 1/2, seal: NBR (Perbunan) Safety bleed valve meets DIN EN ISO 4414 requirements for pneumatic systems. The coupling has an ergonomic grippy slide valve with three functions: 1. Automatic locking of the plug. 2. Switch to the venting state. 3. Unlock the coupling from the vented state. * in points 1 and 2, the movement sequences are carried out under operating pressure. To connect plug and coupling, the plug has to be pressed into the locked state against the pressurized valve. To release the pressurized connection, the release sleeve has to be phushed into direction of the coupling. The plug moves automaticly from the locked into the vented state and the compressed air still present on the plug side can be vented through the coupling. Only now can the plug be safely removed by pulling back the release sleeve. Material coupling: back part, sleeve, coupler body brass nickel plated. Valve brass. Support washer and sleeve-cover plastic. Seal NBR (Buna N) spring and circlip stainless steel AISI 301. Bolts and balls stainless steel AISI 420. Material plug: steel hardend zink plated Nominal width 5.5 mm, brass, surface: nickel plated, single shut off, female thread DIN228/1 (BSP), 1/2, seal: NBR (Perbunan)
Nominal Width: 5.5 mm 5.5 Connection: 1/2 1/2 Flow Rate: 680 l/min 680
more Details
SERIES 122.00
coupling, Article: N11R0
Image similar to the original Article: N11R0, Nominal Width|5.5 mm, Connection|LW10, Flow Rate|1,780 l/min
Nominal width 5.5 mm, material: brass, surface: nickel plated, single shut off, connection type: hose connection, connection size: LW10, seal: NBR (Perbunan) One-hand coupling with automatic 5-point locking. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back into the direction of the connection. The valve will return to its starting position and pushes the plug out of the coupling. Material coupling: back part and body are made of brass nickel plated. Valve brass. Sleeve steel hardend nickel plated. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: steel hardend zink plated. Nominal width 5.5 mm, brass, surface: nickel plated, single shut off, hose connection, LW10, seal: NBR (Perbunan)Steinconnector 110, Rectus 14 + 22, ARO 210, Parker 50, CEJN 300, ORION 44510, JWL 552 + JWL 532, div. Schweizer Fabrikate
Nominal Width: 5.5 mm 5.5 Connection: LW10 LW10 Flow Rate: 1,780 l/min 1,780
more Details